FS: BRZ Part Out (Full Race Turbo Kit, Perrin, Racecomp) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Blanka · 08-20-2018, 02:41 AM

I'm returning my car back to stock and will be parting out all parts (installed or brand new) that I have for the BRZ. Have the new car on the way so the car will either be traded in or sold privately.

Full Race Turbo Kit (7163 twin scroll plus goodies) - $SOLD
I'm still deciding whether to part it out or sell everything as a package. This setup made around 400 whp with E85 at DBW Motorsports (dyno pic below).
I have put probably around 2000 miles on this kit (I live about 5 mins from my office).

Full Race Turbo Kit with 7163 EFR Twin Scroll Turbo
Ceramic coated turbine housing and turbo manifold (turbo manifold has some scratches on the front side, but they are minor)
Turbo Source Inconel Heat Shields for the turbine housing and downpipe
Turbo Smart 14 psi Twin Port Internal Wastegate
Moto East Flex Fuel Kit
AVO Denso 240 liter/hour Fuel Pump Includes the Full Assembly for a drop in install
Oil Pan with Bung Welded in
850cc Injector Dynamics Injectors
Electronic Boost Control Solenoid with harness
Full Race Vacuum Manifold
Radium Catch Can (can be used for either PCV or Crank Case, I have both brackets)
I can throw in the Competition Stage 4 Clutch. I had a Stage 3, but had to immediately replace it with the 4.
I will include both the TurboSmart clamps as well as the original t-bolt clamps
I had an Omni 3 Bar Map Sensor, but the sensor snapped when I removed it from the intake manifold. This will need to be replaced.

Perrin 3" Catback - $SOLD
Used for about 15k miles, still in great condition, some minor wear on the flex pipe

Avo 3" Front Pipe - $75 obo
In good condition, it's just collecting dust in my basement since I got the full race kit.

Perrin Control Arm Brace - $SOLD
Never Installed

SPC Adjustable Rear Lower Control Arms -$SOLD
Never Installed - I'll also throw in the front camber bolts, also never installed.

Racecomp front and rear sway bars - $SOLD
Never Installed

I have a few more items, but I haven't gotten around to taking pics of them yet (RCE Tarmac 2 Clubsport Coilovers, SSR GTV03 18"x8.5 wheels powdercoated hyper grey, STI Motor Mounts, TRD painted side skirts, Five Axis unpainted rear valences)

FRShFA20 · 08-20-2018, 03:10 AM

PM sent

Sent from my SM-G935P using Tapatalk

Tonrogs · 08-20-2018, 08:19 PM

Interested in the perrin exhaust. Can you post a pic or send me a pic of the wear on the flex pipe?

atyc · 08-21-2018, 09:44 AM

Please text 8087251577

ShawnP19 · 08-21-2018, 10:40 AM

PM'd

Gustavo2nd · 08-25-2018, 06:45 PM

Pmd

Midnight Cinderella · 11-22-2018, 11:23 AM

Catch can still for sale?

08-20-2018, 02:41 AM	#1
Blanka Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Alpharetta, GA Posts: 20 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FS: BRZ Part Out (Full Race Turbo Kit, Perrin, Racecomp) I'm returning my car back to stock and will be parting out all parts (installed or brand new) that I have for the BRZ. Have the new car on the way so the car will either be traded in or sold privately. Full Race Turbo Kit (7163 twin scroll plus goodies) - $SOLD I'm still deciding whether to part it out or sell everything as a package. This setup made around 400 whp with E85 at DBW Motorsports (dyno pic below). I have put probably around 2000 miles on this kit (I live about 5 mins from my office). Full Race Turbo Kit with 7163 EFR Twin Scroll Turbo Ceramic coated turbine housing and turbo manifold (turbo manifold has some scratches on the front side, but they are minor) Turbo Source Inconel Heat Shields for the turbine housing and downpipe Turbo Smart 14 psi Twin Port Internal Wastegate Moto East Flex Fuel Kit AVO Denso 240 liter/hour Fuel Pump Includes the Full Assembly for a drop in install Oil Pan with Bung Welded in 850cc Injector Dynamics Injectors Electronic Boost Control Solenoid with harness Full Race Vacuum Manifold Radium Catch Can (can be used for either PCV or Crank Case, I have both brackets) I can throw in the Competition Stage 4 Clutch. I had a Stage 3, but had to immediately replace it with the 4. I will include both the TurboSmart clamps as well as the original t-bolt clamps I had an Omni 3 Bar Map Sensor, but the sensor snapped when I removed it from the intake manifold. This will need to be replaced. Perrin 3" Catback - $SOLD Used for about 15k miles, still in great condition, some minor wear on the flex pipe Avo 3" Front Pipe - $75 obo In good condition, it's just collecting dust in my basement since I got the full race kit. Perrin Control Arm Brace - $SOLD Never Installed SPC Adjustable Rear Lower Control Arms -$SOLD Never Installed - I'll also throw in the front camber bolts, also never installed. Racecomp front and rear sway bars - $SOLD Never Installed I have a few more items, but I haven't gotten around to taking pics of them yet (RCE Tarmac 2 Clubsport Coilovers, SSR GTV03 18"x8.5 wheels powdercoated hyper grey, STI Motor Mounts, TRD painted side skirts, Five Axis unpainted rear valences) Last edited by Blanka; 08-20-2018 at 09:07 PM. Reason: Forgot to post swaybars

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full-Race Motorsports Turbo Kit Owners Thread and FAQ	VerusEric	Forced Induction	141	05-11-2019 10:27 AM
Full-Race Turbo Kit for Sale - $4200	VerusEric	Forced Induction	3	03-16-2019 12:34 AM
BRZ - Full Race EFR 7163 Turbo kit - Clean Install	Circuit Motorsports	Forced Induction	17	01-22-2018 11:14 AM
best turbo kit - currently Full Race?	TEAM SCION	Forced Induction	41	10-14-2016 09:41 PM

08-20-2018, 08:19 PM	#3
Tonrogs Senior Member Join Date: Apr 2018 Drives: 2014 BRZ Limited, Satin White Pearl Location: WI, 53593 Posts: 106 Thanks: 10 Thanked 40 Times in 30 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Interested in the perrin exhaust. Can you post a pic or send me a pic of the wear on the flex pipe?

08-21-2018, 09:44 AM	#4
atyc Member Join Date: Jul 2017 Drives: 15 Subaru BRZ Location: Honolulu Hawaii Posts: 34 Thanks: 4 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Please text 8087251577

08-25-2018, 06:45 PM	#6
Gustavo2nd Member Join Date: Apr 2018 Drives: black frs 2013 Location: austin Posts: 69 Thanks: 1 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Pmd

11-22-2018, 11:23 AM	#7
Midnight Cinderella Mt CR-RRSH Join Date: Oct 2018 Drives: Black/Metallic Blue Location: Port St Lucie, FL Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Catch can still for sale?

User Name		Remember Me?
Password