Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Question on Spacers (https://www.ft86club.com/forums/showthread.php?t=128084)

PacManTheRS1.0 06-04-2018 11:27 AM
Question on Spacers
 
Looking at adding spacers to my RS1.0. Have a question on the OEM stud length. If I get 15mm on the front and 25mm for the rear will the studs be too long and need to be cut down?

Harlock 06-04-2018 11:34 AM
Which wheels are you using? For the 25mm, front or rear, you'll be fine. For 15mm depending on the wheel, you might have to get extended studs and use slide on 15mm vs a bolt on 15mm.

PacManTheRS1.0 06-04-2018 11:50 AM
Quote:
Originally Posted by Harlock (Post 3094835)
Which wheels are you using? For the 25mm, front or rear, you'll be fine. For 15mm depending on the wheel, you might have to get extended studs and use slide on 15mm vs a bolt on 15mm.
Just using stock wheels and I think the 25’s should fit fine, but was worried about the 15’s.

PacManTheRS1.0 06-18-2018 07:45 AM
Update
 
3 Attachment(s)
Update: Added a backup camera, TRD decal, and the 20/25mm spacer setup this weekend. The car definitely feels even flatter through the corner and it looks more aggressive as an added bonus.

Driven Photography 06-25-2018 05:35 PM
in the picture are you using the 25's? just wanted to clarify.


All times are GMT -4. The time now is 03:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.