Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Software Tuning (https://www.ft86club.com/forums/forumdisplay.php?f=88)
-   -   Tune file for turbo's GT86 (https://www.ft86club.com/forums/showthread.php?t=127852)

Roxas93 05-24-2018 10:35 AM

Tune file for turbo's GT86
 
Hi dear, please can sameone share his tune file? Doesnt matter It has made with ecutek, ecuflash etc... The only thing I want is that the file has ti benedica for turbo's GT86/brz Car, don't care if It is sbd, greddy or other turbo's kit. All' turbo kit tune file are ok for me

I Need this file very urgently

Conti93 05-24-2018 12:54 PM

Quote:

Originally Posted by Roxas93 (Post 3090954)
Hi dear, please can sameone share his tune file? Doesnt matter It has made with ecutek, ecuflash etc... The only thing I want is that the file has ti benedica for turbo's GT86/brz Car, don't care if It is sbd, greddy or other turbo's kit. All' turbo kit tune file are ok for me

I Need this file very urgently

Here are some base maps for the SBD turbo kits: http://www.ft86club.com/forums/showp...21&postcount=1
These are US maps, but you can open them with the appropriate definition on RomRaider et similia.

p.s. Io scriverei a Giovanelli :D

Pippoemme 01-09-2021 03:58 PM

hello,

I've tried to open the A01C tune with the definitions file released by OFT but it did not work: many error messages popped up during the tune opening phase (e.g. ... table editing disabled, tune or ROM image may be corrupted .... ) and after the file opening was complete the tables inside where quite wrong (strange random numbers jumping up from a cell to the neghbouring cell and then going back in the next cell, and so on....).
I believe it is because the definition file from OFT is v4 version while the tunes of yeat 2014 required previous OFT definitions, do you think it is possible ? Just in case, can someone provide the older version definitions for the A01C code?
Many thanks in advance,
Giuseppe

steve99 01-09-2021 06:03 PM

Quote:

Originally Posted by Pippoemme (Post 3398694)
hello,

I've tried to open the A01C tune with the definitions file released by OFT but it did not work: many error messages popped up during the tune opening phase (e.g. ... table editing disabled, tune or ROM image may be corrupted .... ) and after the file opening was complete the tables inside where quite wrong (strange random numbers jumping up from a cell to the neghbouring cell and then going back in the next cell, and so on....).
I believe it is because the definition file from OFT is v4 version while the tunes of yeat 2014 required previous OFT definitions, do you think it is possible ? Just in case, can someone provide the older version definitions for the A01C code?
Many thanks in advance,
Giuseppe


Open the tune with a hex editor search for ZA1J there should be three calid in rom check they are all A01C if they are use the romraider A01C definition from romraider below



https://github.com/TD-D/SubaruDefs/t.../RomRaider/ecu

Pippoemme 01-12-2021 08:41 PM

Quote:

Originally Posted by steve99 (Post 3398726)
Open the tune with a hex editor search for ZA1J there should be three calid in rom check they are all A01C if they are use the romraider A01C definition from romraider below


https://github.com/TD-D/SubaruDefs/t.../RomRaider/ecu





Many thanks Steve99, it worked fine, wonderful !!


All times are GMT -4. The time now is 11:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.