JDL Turbo Manifold, 3" Downpipe & Wastegate Dump - CERAMIC COATED
 

Selling the hot parts off my JDL Turbo Kit because I switched to a different setup from JDL. This setup is made to work with a V-Band turbo, in my case I was running a Garrett GT with a Tial housing. This setup has 2 minor dents on the downpipe which are pictured. There are no defects, fitment issues, or anything wrong with these pieces at all. All of the parts are thermal coated bronze.

This setup is around $2,000 from JDL when including the thermal coating, which truly helps, a lot. JDL is local to me, & these pieces are top notch quality. Like I said, only reason for sale is me switching up my setup & was easier for all new hot parts to be made for me by JDL, so I replaced the entire setup.

I want $900, can ship anywhere in the US upon arrangement. These are off the vehicle, boxed up & ready to go.

Only trades would be -

Aftermarket Clutch
Overpipe & or FrontPipe
3" Catback Exhaust
Big Brake Kit (front)

Thanks for looking. Contact me here directly, I get notifications.

https://preview.ibb.co/g9yjXH/DSC06293.jpg
https://preview.ibb.co/k13CKx/DSC06295.jpg
https://preview.ibb.co/kX9PXH/DSC06296.jpg
https://preview.ibb.co/hizPXH/DSC06297.jpg
https://preview.ibb.co/gUBhKx/DSC06298.jpg
https://preview.ibb.co/eQ2dsH/DSC06300.jpg
https://preview.ibb.co/d2hdsH/IMG_3313.jpg

Are youconsidering 04-07 sti brembos? https://uploads.tapatalk-cdn.com/201...0761871a23.jpg
https://uploads.tapatalk-cdn.com/201...5fccf768ec.jpg


Sent from my iPhone using Tapatalk

Hello, interesting to me. Can you PM me the details of the swap & more details of what you have? I have not looked into the STI brake swap & want to stay with something bolt on, opposed to a setup where you need multiple brackets, re-drilled rotors etc. Just not sure how the STI setup works so if you could PM me details, I would appreciate it!

Thanks!

i Just saw the V band connection, unfortunately my turbo doesnt have V band connection. the STI swap is from 04-07, it uses a bigger rotor and caliper, usually there were arguments against using it due to more front bias and how it is front mounted at the front and rear mounted from 04-07 sti. but some people did it and were using it. look it up on google "brembo sti brz" usually these are colored orange.

Ah, thanks for the clarification. If you ended up wanting to work something out, let me know. Easiest way to make this setup work is purchase the Tial housing for your turbo & everything bolts up.


Sent from my iPhone using Tapatalk

SOLD