Brake duct/Turn Signal Delete
 

Hi, I'm going to be swapping my 86 front bumper to an FRS one. My turn signals are integrated with the headlights, so that leaves an opening where the FRS turn signals are. I was planning on using the Innovated Dynamics brake/intake ducts, but they don't ship to Canada. Does anybody know of any other companies that make anything similar to this?

http://www.innovateddynamics.com/pro...e-intake-ducts

They definitely ship to Canada. Try emailing them for a quote.

Tried ordering and it said they dont. I'll try that though.

Just run the standard FRS bezel and wire white lights to the signal housings as pseudo fogs

These look the most OEM and are less than $100

http://www.ft86speedfactory.com/oem-...B#.WpdmliJOnDs

Trying to find something similar to what I posted that would remove the turn signal. Doesn't look like there is anything else available in that style.

I'm in the same boat as you where I don't need the fog light or turn signal as well. I don't necessarily want a brake duct either. Let me know if you find something cool!

https://i.imgur.com/nvVx6s6.jpg

Yeah, I'm probably not going to actually run ducting to the brakes either. This piece doesn't include any of that anyways. It's really more for looks. I was considering just making up some blank covers and having them painted, but I'm not sure how it would look.

So can i disable my turn signal in front bumper?
Cause i have the morimoto headlights which have turn signal built in.
What led white light you recommend?

If you're running aftermarket headlights with integrated turn signals, the "clean" or "proper" way to wire them was to depin the turn signal wire and add it to your headlight harness (instead of a wire splice). In that sense, you're not necessarily "disabling" the turn signal, just relocating the wire.


White LED light model depends on the bulb/size you're running. I like to use JDM Astar these days for my LED lights.


If you're trying to re-use the turn signal housings, you'll need a 7444 bulb. You can either re-pin/splice from your fog light harness if you want to utilize the fog light switch. Or, you can might also be able to re-utilize the low running circuit on the front turn signal harness (since the front turn signal 7444 bulbs are dual-filament), but I think that would make your fog lights flash when your signals are blinking.

Did you disable yours?

No. I use my stock turn signals