Upgrading 2013 suspension to 2017. Parts needed?
 

After reading some reviews of the new suspension changes for the 2017 model year it sounded like a worthwhile upgrade if I could find the parts cheap enough. I managed to find a complete set of stock 2017 front and rear strut assemblies. That leaves me to just buy the stiffer rear sway bar and matching bushings. Can someone confirm that these are the correct parts?

20451FG002 (sway bar)
20464CA020 (bushing)

I don't believe any other significant parts have changed, correct? BTW, it seems the stiffer sway bar is also shared with the 2008 WRX so it might be possible to find one second hand. But the bar only costs ~$110 and the bushings are $8 each so there's not a big reason to buy used.

Thanks!
-Matt

I was looking to do the same - did the part numbers that you listed end up being the correct ones?

You can check out LEEPARTS on EBAY. They may have relatively new used salvaged parts that you may need (I got my 2019 TRD SE exhaust & ABS sensor from them).

Check out this thread:
https://www.ft86club.com/forums/showthread.php?t=142230

Post #3

- Andrew

Part numbers are listed in the bottom commentshttps://uploads.tapatalk-cdn.com/202...133a670a31.jpg

Sent from my GM1915 using Tapatalk