U0100, c1294, p0700
 

Hello,

So i just recently got a rp400 turbo kit with a deaschwerk 300 cc fuel pump, deastchwerks 700cc fuel pump, and flex fuel kit from delicious tuning. I have everything put on the car but it wont start. There are three codes popping up which are a u0100, p0700 and a c1294. I double checked the fuel pump injectors and there was fuel as well as the fuel pump being put on correctly. So its kind of confusing to why it wont start. The ecu is grounded and the flex fuel wiring is good. When the ecutek program is reading it sometimes says there no response from the obd under a section in A/C. Everything else reads. It's an automatic 2014 scion frs. Any help would be appreciated.

Sent from my SM-G935T using Tapatalk

Turbo kit, changed the MAP sensor? Have you flashed the new tune onto the ECU?

Yeah i have the omni 4 bar map sensor. I emailed delicious tuning and they said the tune or the map sensor wasnt the problem.

Sent from my SM-G935T using Tapatalk

following for information.

message me your number and I can walk you thru it when you have time to work on your car

It works! I just changed the map sensor and it started

Sent from my SM-G935T using Tapatalk