|
After magna gauge cluster install.
After installing the face, I can't get the needles to stay in the correct positions for my tach and speedometer. Do I have to replace the cluster or is there a trick to help this?
Sent from my SM-G935V using Tapatalk |
Pull the needles turn ignition to run reinstall to Zero while in the run position.
|
Thanks for the tip!
Sent from my SM-G935V using Tapatalk |
So the solution turned out to be that the gauges zero when you open the car door. Turning the ignition doesn't zero the gauge. Opening the car door after it sits for ten minutes does. I pulled the needles and then opened the car door. Put the needles back on and all was gravy. 3 hours later...
Sent from my SM-G935V using Tapatalk Edit this is a MY17 86 |
| All times are GMT -4. The time now is 04:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.