CEL problem, help
 

c1201 p0016 p0011 SCION FRS 2015y
The car is not under warranty.
I bought it on copart and I repaired
Car was and is run and drive.
Where to find a problem to get started

http://i67.tinypic.com/qrxcf7.jpg

The plug that comes in is cracked (blue)
Could this be the cause of the error?

P0011 - Camshaft Position "A" - Timing Over-Advanced or System Performance (Bank 1)
P0016 - Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)

Both are related to the same sensor/cam system. It could be a faulty sensor or it could be something else. The best thing to do would be to swap sensor with another and see if the codes change. C1201 appears to be a generic ECM fault code, will probably clear with the other 2.