OFH tune with Tomei Headers
 

Hi I was wondering if it was safe to use the OFH stage 2 tune with the Tomei UEL header. I am going to try tuning it and run some pulls and post the data logs here but I need help finding out if the logs look ok.

I've got this set up. No problems.


Sent from my iPhone using Tapatalk

if you have good quality 93 usa fuel you should be fine, but best to log and check fueling and knock parameters.

We only have 91 octane here in Utah. The real time diag. showed no knock correction but im not sure about the fuel ratios. I am going to post the data logs here. Let me know if im missing anything.

I've been running that header and tune since it came out, no issues at all. Just make sure you're running high quality 93oct and you're good

I just got the Tomei EL header and overpipe, and Invidia catless front pipe and I have OFT. I can't wait to have them installed! I'm glad that nobody has had issues with this setup and a tune.

We're talking about UnEqual length headers in here, do NOT use that tune with your Equal Length header

quick question guys, you said dont run 91 oct on tomei uel headers with the flash?

You run the gas you have a tune for. If you flashed a 91oct tune for UEL headers then you use 91 gas, if you flashed a 93oct tune you use 93 gas. You can go up but not down. Meaning you can use 93 gas on a 91 tune but you shouldnt use 91 gas on a 93 tune.