Bolt sizes for 2012 86 can anyone help?
 

Hi guys I wondered if anyone could help me out with a couple of bolt sizes. I need the six bolts that hold the inlet manifold to the head and the 4 bolts that hold the injector heat shields on. I have the Crawford power blocks I am removing that use longer bolts so I need to order the stock ones but they are on back order until march which is to long to wait. So I wondered if anyone knew the correct size and length or someone could measure the stock bolts for me please? Apparently the heat shield bolts are different lengths on each side of engine.

I can then order generic bolts From eBay rather than wait three months for the same thing from Toyota.

I would go look for Subaru parts not Toyota. The bolts are common to many different Subaru models and they would have them in stock.

http://parts.subaru.com/a/Subaru_201...10-050-01.html

Intake Manifold M8 x 30, 12mm hex flange head.

Brackets... Not sure, still looking through my old docs.

Toyota part numbers:

http://img.auto-kat.com/toyota/GEN/A2/177612%20.gif