Alternate location for reverse camera (HowTo)
 

I mounted up a Rydeen Duo on my Subaru BRZ using this post:

BRZ Limited Backup Camera Step by Step (WARNING long post, many pictures)

I found that I didn't like the OEM location much. When parking, the driver side parking lines, or curb, or other cars... strongly favored the passenger side visually. At times, it took a bit of mental arithmetic that I couldn't afford in my rush to avoid inconveniencing others. As a result, I removed it and installed it differently: in the center.


Comparison of OEM (top) and centered (bottom):
http://i.imgur.com/p29Sc8l.jpg



OEM location:
http://i.imgur.com/NT4p65L.jpg



Alternate centered location:
http://i.imgur.com/c13EEgr.jpg



What it looks like mounted (the back hangs on the ridge):
http://i.imgur.com/9tXEh1X.jpg



Also, I no longer have a stock headunit. As such, these are the wires to tap in the rear trunk, along the back trunk wall:
http://i.imgur.com/M7eRZcY.jpg

Great write-up, I'm really interested in adding a backup cam as well.

i bought this shit...doesn't fit because the camera won't go through the trunk garnish so i mounted it with 3M tape to the trunk...at least the video quality is good

https://ae01.alicdn.com/kf/HTB1JcW0L...ont-b-2013.jpg

3M tape is enough to keep it mounted even with the Florida heat? Which model is that?