What Parts Do You Wish Were Produced For the FR-S and BRZ?
 

What products would you like to see developed for both the FR-S and BRZ? Whether it be as small as custom door sills or as large as a bolt in 6 point cage (I realize these are both obtainable items), but I want to hear from everybody else!

A fuel pump that doesn't chirp 😅

Sent from my Pixel using Tapatalk

revised throw out bearing for stock clutch

I want to see some better gauge mounting options (high quality)

Some additional ideas in this thread

"New parts do you want to see manufactured"

and

If you could see Extreme Dimensions make a new part for frs/brz what would it be?

There may be others.

and oh yea... LOUVERS!

A steering wheel with only what I need on it...A horn button, and simple cruise control buttons...instead of the stupid buttons they've put on the 2017.

(I detest the current cruise control stalk beside the steering wheel...easily confused with the wiper stalk, and not intuitive [down to set and up to resume..odd] ).


An engine under the hood which has some low rpm torque.


Transmission and rear end gearing which will allow low rpms, running 90mph...for better gas mileage at freeway speeds.


Oh sure, this is what you really wanted to hear...

since were dreaming about things that won't be made, then this.

A larger capacity engine as an option.

A CARB-legal, PNP, 3SGE engine swap kit.

Optional interior color and fabric choices. Also, make the convertible version.

STI trim with a 2.5 liter 240hp N/A engine that revs to the moon!

Get rid of the analog speedometer and replace it with oil temperature and pressure gauges that are calibrated in actual degrees. Put coolant temperature in degrees as well. Transmission temperature would be nice too.

Add some map lights instead of just the one overhead dome light. Add a rear dome light because you can never have enough light when you are digging through your car at night.

Get rid of the trapezoid shaped factory radio and go to a standard double DIN with analog RCA preamp outputs for an aftermarket amplifier.

Get rid of Starlink and support android/iphone mirroring.

Drill cutouts in the frame so that you can replace the spark plugs without raising the engine.

Heated steering wheel option would be nice.

Stronger Studs