SBD Announces the SBD500X Ball-Bearing Turbo Kit for the FT86!
 

SBD announces the launch of our $2999 "Stage 2" SBD500X Turbo Kit, which features our 58mm Inducer Ball-Bearing Turbocharger for even more power ;)

*Custom Ball-Bearing 58mm Inducer Billet Compressor Wheel CHRA
*Ball-Bearing, Oil & Water Cooled
*Internally Wastegated with 0.7 Bar (10 PSI) Spring
*58mm IND/76mm EXD Compressor Wheel
*60mm IND/55mm EXD Turbine Wheel
*Power levels up to 300-325whp are Capable with a Stock Motor + 91/93 Octane Gasoline
*Power levels up to 400whp are Capable with a Stock Motor + E85 Ethanol
*Power levels up to 500whp are Capable with a Built Motor + E85 Ethanol

The turbocharger is a 100% Direct Swap Plug-N-Play that re-uses your existing SBD400X Oil Feed & Return Lines. It re-uses the same compressor cover found in the SBD400X kit, machined for the larger 58mm compressor wheel, so your inlet piping & filter are identical.

Simply add the two water lines for an easy and fast installation.

https://spdbydesign.com/product/sbd5...-brzscion-frs/

Available as a complete turbo kit for $2999 or as a standalone turbo upgrade to the SBD400X turbo kit for $1099!

400whp on E85 @ 14 PSI on a 100% Stock Internal Engine (Uncorrected, Actual DynoJet Measurement!)

https://c6.staticflickr.com/9/8056/3...1d3620ca_o.jpg

Got to love that flat torque curve ;)

Good job EQ Tuning in Northern California on this car!