Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Issues | Warranty | Recalls / TSB (https://www.ft86club.com/forums/forumdisplay.php?f=72)
-   -   P0175 code after installing intake (https://www.ft86club.com/forums/showthread.php?t=104444)

VictorKassil 04-14-2016 05:19 PM
P0175 code after installing intake
 
I just installed a new intake on my car and now I keep getting the system too rich bank 2 code and a rough/low idle. How can I fix this without changing back to the stock intake?

Toyarzee 04-14-2016 05:35 PM
Tune or switch to aftermarket intake with same oem charge pipe diameter. What other mods are on?

VictorKassil 04-14-2016 05:45 PM
Just a Works axleback. Could there be a problem with the MAF?

FRSBRZGT86FAN 04-14-2016 05:55 PM
Quote:
Originally Posted by VictorKassil (Post 2622268)
Just a Works axleback. Could there be a problem with the MAF?
Did you put the maf sensor in the correct orientation? It can only go one way? Did you drop or touch the maf?

Disconnect the battery for awhile and keep the key in the on position, see if you can reset the code and then check if it comes on again

VictorKassil 04-14-2016 08:22 PM
It goes on one way.

steve99 04-14-2016 08:36 PM
Quote:
Originally Posted by VictorKassil (Post 2622483)
It goes on one way.
which intake do you have


All times are GMT -4. The time now is 05:57 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.