15mm h&r spacers tq specs?
 

I recently purchased h&r spacers second hand off somebody and was wondering if anybody has the tq specs for the bolts that connect the spacers to the hubs. I would also like to know the tq specs for the bolts that hold the wheels to the spacers. I went 90ft/lbs on both. Is that where they are suppose to be?

Sent from my LG-D850 using Tapatalk

I think its same as factory wheel spec so 90-100ft/lbs should be good.

Factory say 89. So I went 89 on the spacers to hub, and 90 on the wheels

Sent from my LG-D850 using Tapatalk

You should be good then. Just check wheels again in 100km's to be safe.