Homebrew Oil Cooler (Setrab/Mocal)
 

Homebrew Oil Cooler (Setrab/Mocal)

**Update: Track Day Log
http://www.ft86club.com/forums/showp...5&postcount=33
http://farm6.staticflickr.com/5456/9...737f00d8_c.jpg
20130629-TDE-MSR-Green-Session3-Temps by VictorN07, on Flickr

**Update: More Track Day logs!
http://www.ft86club.com/forums/showp...5&postcount=40

**Update: Installation pictures
http://www.ft86club.com/forums/showp...8&postcount=51

http://farm6.staticflickr.com/5473/9...6787c34d_c.jpg
20130628-HomebrewOilCoolerInstall-070 by VictorN07, on Flickr

http://farm4.staticflickr.com/3686/9...395231fd_c.jpg
20130628-HomebrewOilCoolerInstall-132 by VictorN07, on Flickr




















Few words. Lots of pictures. Install will come later.

Not pictured: -10 AN Aeroquip hose, Loctite 567 thread sealant, cooler mounting hardware.


Setrab 13 row oil cooler featuring Danbo
http://farm4.staticflickr.com/3822/9...fd650902_c.jpg
20130626-HomebrewOilCooler-010 by VictorN07, on Flickr

http://farm6.staticflickr.com/5474/9...b20c8a5a_c.jpg
20130626-HomebrewOilCooler-017 by VictorN07, on Flickr

Danbo is full of wonder.
http://farm8.staticflickr.com/7459/9...9e1f0e37_c.jpg
20130626-HomebrewOilCooler-021 by VictorN07, on Flickr

-10AN 22mm fittings
http://farm6.staticflickr.com/5448/9...d107287b_c.jpg
20130626-HomebrewOilCooler-024 by VictorN07, on Flickr

http://farm4.staticflickr.com/3698/9...f92c61f9_c.jpg
20130626-HomebrewOilCooler-028 by VictorN07, on Flickr

It's black
http://farm4.staticflickr.com/3825/9...69896428_c.jpg
20130626-HomebrewOilCooler-034 by VictorN07, on Flickr

http://farm8.staticflickr.com/7375/9...d7a02428_c.jpg
20130626-HomebrewOilCooler-038 by VictorN07, on Flickr

http://farm8.staticflickr.com/7427/9...4794f027_c.jpg
20130626-HomebrewOilCooler-040 by VictorN07, on Flickr

http://farm4.staticflickr.com/3801/9...9def27bd_c.jpg
20130626-HomebrewOilCooler-041 by VictorN07, on Flickr

Mocal Thermostatic Sandwich plate
http://farm8.staticflickr.com/7445/9...cc1797d0_c.jpg
20130626-HomebrewOilCooler-043 by VictorN07, on Flickr

http://farm8.staticflickr.com/7329/9...06c8f753_c.jpg
20130626-HomebrewOilCooler-044 by VictorN07, on Flickr

Instruciones
http://farm3.staticflickr.com/2813/9...c2875e44_c.jpg
20130626-HomebrewOilCooler-047 by VictorN07, on Flickr

http://farm8.staticflickr.com/7434/9...47792ef5_c.jpg
20130626-HomebrewOilCooler-048 by VictorN07, on Flickr

It comes apart easily.
http://farm3.staticflickr.com/2884/9...6c91a2d0_c.jpg
20130626-HomebrewOilCooler-050 by VictorN07, on Flickr

This holds it all together
http://farm3.staticflickr.com/2853/9...41b35964_c.jpg
20130626-HomebrewOilCooler-053 by VictorN07, on Flickr

I love this picture
http://farm8.staticflickr.com/7385/9...961f7afd_c.jpg
20130626-HomebrewOilCooler-056 by VictorN07, on Flickr

I think there are nicer gaskets out there
http://farm6.staticflickr.com/5538/9...70925c2d_c.jpg
20130626-HomebrewOilCooler-061 by VictorN07, on Flickr

http://farm3.staticflickr.com/2833/9...15855883_c.jpg
20130626-HomebrewOilCooler-062 by VictorN07, on Flickr

Spacer
http://farm8.staticflickr.com/7456/9...c48bdd43_c.jpg
20130626-HomebrewOilCooler-064 by VictorN07, on Flickr

Bottom of spacer. Danbo is angry at the gasket
http://farm6.staticflickr.com/5501/9...80f10f8c_c.jpg
20130626-HomebrewOilCooler-066 by VictorN07, on Flickr

All the fittings required
http://farm8.staticflickr.com/7329/9...7b4e1abb_c.jpg
20130626-HomebrewOilCooler-073 by VictorN07, on Flickr

This is how I will use all the fittings
http://farm4.staticflickr.com/3713/9...f1307ef4_c.jpg
20130626-HomebrewOilCooler-075 by VictorN07, on Flickr

More documentation
http://farm8.staticflickr.com/7293/9...562d709e_c.jpg
20130626-HomebrewOilCooler-081 by VictorN07, on Flickr


Fin

nice shots! Info on price/item numbers?!

Huh I just noticed that the colours on my Android Chrome look different than on the PC. It looks correct on my iPhone

Mocal Thermostatic Sandwich Plate with FA20 Spacer
Aeroquip Socketless Hose -10 AN
Mocal 90 degree Socketless Push Lock End -10AN 1 Pair
Mocal 45 degree Socketless Push Lock End -10AN 1 Pair
Mocal 1/2" BSP -10AN Fitting, 1 Pair
Setrab 13 row oil cooler
Setrab 22mm x -10AN fittings, 1 Pair

will this be middle or side mount?

depending on what rom you are running there should be a color correction option set......


In for price info.. I was also looking at the setrab coolers...

Danbo needs an FT86 shirt.

Planning to mount it on the stiff black splash guard, but off center. It will be over to the driver side as much as possible. I already took off the air scoops around the FR-S/86 grill so there is more room.

nice! i'm looking to do a similar setup pretty soon. can't wait to see it mounted.

Ordered everything from RacerPartsWholesale. Here is an excerpt from my R&D spreadsheet.

http://farm3.staticflickr.com/2814/9...bfbc5e83_c.jpg
20130627-HomebrewOilCooler by VictorN07, on Flickr

I am in no way responsible for any damage to your vehicle should you go this route. I feel comfortable working in my car so I opted to go this route to save some money.

With this you have to get creative and find your own mounting solution. Going with a kit means you won't have to do this, as well as getting support from the merchant and manufacturer if you get in a bind. In more or less words, I'm on my own.

Larger coolers (16 row, 19 row) will fit depending on desired placement. It's tight in my car with the Vortech Supercharger so I'm going with the smaller cooler.

I plan to take more pictures. DIY guide maybe.

Are you in Houston (Victor on FB?) I've been looking to do something like this, but haven't finished installing the parts I have in my garage as-is... Anyway, if you're in Houston, I'd like to see this. How much was it out the door?

The price I showed above was it. No Tax and free shipping.

Can you/anyone please confirm if the oil filter thread is M18x1.5?