Kevin's from salvaged to track FRS
Picked up this previously salvaged title 2014 FRS down in Houston, TX and brought it all the way to Iowa. The car itself is basically stock besides some Stance Suspension coilovers and lower control arms.
Once I got it home, I swapped out the brake lines, fluids, and pads and took it for a spin around Mid-Ohio. Car felt great and was a blast to drive despite having some 500 treadwear all season tires. Plan to turn the car into my weekend warrior track car that I can drive to and from the track. Current Mod List: Verus Engineering UCW Rear Wing Verus Engineering Composite Front Splitter FT86SpeedFactory UEL Header Verus Engineering Hood Louvers Perrin Oil Cooler FactionFab FR-Spec Coilovers Grimmspeed Strut Tower Brace Grimmspeed Master Cylinder Brace Hawk HP+ Pads FactionFab Swept Slot Rotors Verus Engineering Brake Cooling Kit Apex EC-7R 17x9 +35mm Falken Azenis RT660 245/40/17 Rays Gram Lights 57CR Ceramic White Pearl 17x9 +38 Falken Azenis FK510 245/40/17 Remark R1 Spec Titanium Catback Exhaust Tomei Front Pipe Motiv Overpipe Recaro Profi SPG Buddy Club Super Low Down Seat Rails https://i.ibb.co/n11H9KY/DSC07978.jpg https://i.ibb.co/8Phk8DB/0001-W7-1872.jpg https://i.ibb.co/JcDf1N0/0044-W7-5934.jpg Will be trying to document the whole process through my YouTube channel and on here, so if you're interested in following along grab a seat! https://www.youtube.com/watch?v=XygWz3aJuEI |
Installed the Perrin Oil Cooler to take care of the high engine oil temps at the track.
https://www.youtube.com/watch?v=IBb8zGZmvdI |
1 Attachment(s)
Very nice, though I do think the FRS looks best with the spacer invaders plastic stuff in the front grille.
I painted the white hat on my crash bar using red plastidip and you actually can't tell the difference, I highly recommend if it you're going to leave it out there! |
Quote:
|
|
When are the JDM headlights coming?
Sent from my iPhone using Tapatalk Pro |
Quote:
Probably won't be installing a set of headlights unless I need to do so for work. |
Finally got rid of some horrendous clunking in my front suspension.
https://www.youtube.com/watch?v=WnEqvBrKCUU |
Quote:
|
Quote:
|
Cleaned up the engine bay a little bit with the Grimmspeed Pulley Cover & Hood Struts
https://youtu.be/9tq4at5uPbQ |
Oh, you're the dude from SubieSpeed and FTSpeed while Thomas is hiding from spark plugs
|
Quote:
It honestly isn't as bad as some people make it. I'll do another video on my channel going through both sides since people complained. |
|
All times are GMT -4. The time now is 01:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.