How well does 18x9.5 fit on the front?
Anyone here run 9.5 width on their fronts? I'm trying to go square so I can rotate my wheels and was wondering if there are any issues that arise when running a 9.5 in the front.
Will be using Tein coilovers, not planning on making it low as hell. Thanks! |
Yes people do run 9.5 in the front. Depends on offset if you will have issues. You might rub depending on how low you are, your offset, and tire size.
|
I run 18x9.5 +40 245/40 tyres without any scrubbing issues at all. It scrubbed on full lock when i first installed them but the car had toe out after fitting coil overs. after the wheel alignment no issues what so ever. https://scontent.fsyd4-1.fna.fbcdn.n...ed&oe=5BD12803
|
I have Tein Flex A, 18x9.5 Rays with 245/40 MPS4. only slightly lowered, like 1.5"
No problems at all (with coilovers). Rotation is a good idea, I notice fronts wear out a bit quicker than rears.https://uploads.tapatalk-cdn.com/201...38a1873fab.jpghttps://uploads.tapatalk-cdn.com/201...0246f4f410.jpg Sent from my SM-G930F using Tapatalk |
Quote:
|
Quote:
|
Quote:
|
I have Tein Flex A with Work Emotion Kiwami 18X9.5 +38 255 35 R18 MPS4. No issues fitting, however I have read on the meaty tire thread that 265 does rub in the rear.
On 255 35 R18, no issues with rubbing for the most power EXCEPT when I make a right turn into a driveway, the compression causes it to rub on the Driver Side Rear Bumper corner. My alignment specs are -1.0 Camber 0 Toe Front, -1.1 Camber Rear 0.08 Toe-In Rear. I have SPC LCAs to align the rear. Running -1.0 camber or close in the front causes the tire to stick out a lot, I'd recommend around 1.4~1.5. https://scontent-lax3-1.xx.fbcdn.net...d8&oe=5BACD8C9 https://scontent-lax3-1.xx.fbcdn.net...97&oe=5BDDD9F5 |
All times are GMT -4. The time now is 09:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.