Anyone running straight exhaust with turbo?
As per title, keen to hear a video of anyone running a turbo 86 with just a straight exhaust.
I can't find a muffler design I like. And I wonder if it'll really be all that loud anyway. I have a track pipe and straight front pipe as well now, but still with the cat in the stock headers, and I've gotten used to it. A friend has a straight pipe on his sti drift car, and it's much louder than my car currently is. But I wasn't sure if this was because he was using a twin scroll. Thanks in advance. |
Quote:
|
My turbo kit will be 3", from turbo to rear
|
Mine is a full 3" turbo back and its loud. I've heard it without a muffler and I wouldn't want to drive it any more than I had too.
The Frozen North |
2.5in with invidia q300, still very loud at WOT.
|
The exhaust housing will make some difference but 3" turbo back and no muffler is very loud, and drone is pretty bad.
|
I have straight through with a Perrin muffler and it's loud. I can't imagine what it would sound like without a muffler. Currently running 2.5" straight through off the turbo into a Perrin 3" catback
[ame="https://www.youtube.com/watch?v=rAMd0bOCFco"]3" Perrin Non-Resonated on a AVO Turbo BRZ (catless) - YouTube[/ame] It's since broken in a little bit and become a tad bit louder. The drone is very noticeable at 100km/h and higher on the highway. |
I just heard an open pipe 3" downpipe turbo FA20 last night and at idle its tolerable but after that it's earplug loud.
|
I run 3" to 2.5" catless/resonatorless but have a muffler and it is quiet at idle and just right everywhere else.. (except I have an open dump pipe so at WOT its insanely loud).
I think without a muffler it would be too much. |
My 3" perrin with the turbo is very quiet just driving around, and not too loud at WOT. i have videos posted in the perrin thread.
[ame="http://youtu.be/pVvDt69U3kk"]http://youtu.be/pVvDt69U3kk[/ame] [ame="http://youtu.be/gEXFVP6t8JM"]http://youtu.be/gEXFVP6t8JM[/ame] |
My car is kinda nice sounding atm, but id love it being louder. I have plans of changing my nameless down pipe to a straight version, and maybe build a midpipe with a varex muffler + a muffler in the axle back versus my current setup which has a cat+res in the downpipe (op/fp) a res in the midpipe and the two res in the axle back.
[ame]http://youtu.be/Vxcdc50WHQY[/ame] |
Looks like a need a muffler :(
|
Quote:
|
If you value your eardrums you'll run one
The Frozen North |
All times are GMT -4. The time now is 06:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.