Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine Swaps (https://www.ft86club.com/forums/forumdisplay.php?f=92)
-   -   dual pump control (https://www.ft86club.com/forums/showthread.php?t=146925)

brzlegend 09-19-2021 02:31 PM
dual pump control
 
You can run the second fuel pump by buying another oem fuel pump controller and piggy backing off the two small control wires from the ecu. Use a relay and fuse for the power on the second one, each controller will run a 285 walbro (hellcat pump) simultaneously, it does not ovewhelm my regulator.

ML 09-20-2021 01:04 PM
jUsT gEt A sUrGe TaNk

brzlegend 09-21-2021 09:36 PM
Quote:
Originally Posted by ML (Post 3467286)
jUsT gEt A sUrGe TaNk
Still have to power the pumps in a surge tank. Three oem fuel pump controllers could run a dual pump surge tank setup. Oem electronics are always more reliable than aftermarket and PWM controllers puts less heat in the fuel and pump. I bought an oem fpc from ebay for $20.00.

NoHaveMSG 09-22-2021 11:56 AM
Quote:
Originally Posted by brzlegend (Post 3467722)
Still have to power the pumps in a surge tank. Three oem fuel pump controllers could run a dual pump surge tank setup. Oem electronics are always more reliable than aftermarket and PWM controllers puts less heat in the fuel and pump. I bought an oem fpc from ebay for $20.00.
Thanks for that tip. Just picked up an FPC as well off ebay for cheap.


All times are GMT -4. The time now is 06:26 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.