Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Exterior Parts - Lighting (https://www.ft86club.com/forums/forumdisplay.php?f=86)
-   -   Diode Dynamics Subaru BRZ RGBW Multicolor & Switchback LED DRL Boards! USA Made! (https://www.ft86club.com/forums/showthread.php?t=98992)

Diode Dynamics 12-17-2015 03:42 PM

Diode Dynamics Subaru BRZ RGBW Multicolor LED DRL Boards! USA Made!
 


From the factory, the 2013-2016 Subaru BRZ has LED panels in the headlight that illuminate for the parking light and DRL. With these Diode Dynamics OEM-grade replacement LED panels, you can upgrade your look by making them function as both the white running light, with full multicolor functionality.


Made in USA: These DRL Boards were proudly CAD-designed by our engineers right here in St. Louis, Missouri to be an OEM-grade, drop-in replacement for your factory DRLs! These use high quality LED emitters that ensure extremely high brightness, even during the day. The RGBW 5050 LEDs are high-binned for color uniformity.

This product is not just RGB- it is RGBW! That means there is an LED chip that is specifically white in color, right next to the standard red, green, and blue chips. By using an RGBW controller rather than the standard RGB, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals.

There is a standard RGBW input plug (5-pin) to connect to your RGBW controller, which should then be powered by your parking lights or any other 12V signal. This connector is plug-and-play with Diode Dynamics controllers. We strongly recommend the use of Diode Dynamics controllers with this product, for ease-of-use. However, you can connect any standard RGB or RGBW controller by cutting the pins off the connector end, and connecting them to your controller, in the required color configuration, as dictated by the controller you use. This does not void the warranty.

For OEM-grade reliability, the LEDs are protected by a thermal management system, which is integrated into the panel and driver. If the temperature of the LEDs becomes too high for any reason, the output of the LEDs will decrease, to ensure long life in even the harshest environments. And of course, the advanced constant-current driver ensures that there will be no damage to the LEDs long-term from the harsh electrical system of the vehicle.

Professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Checkout our dealer locator tool:


Find a Diode Dynamics Dealer


All Diode Dynamics products are backed by a 3-year replacement warranty.




[ame]http://www.youtube.com/watch?v=ifmj2ktqr54[/ame]





Diode Dynamics: 2013-2016 Subaru BRZ Multicolor LED Boards








If you have any questions, please don't hesitate to post, PM, email contact@diodedynamics.com or call us: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
Diode Dynamics



Diode Dynamics 12-17-2015 03:48 PM

http://www.diodedynamics.com/images/...oard_green.jpg

Diode Dynamics 12-18-2015 09:17 AM

http://www.diodedynamics.com/images/...w_side_red.jpg

Diode Dynamics 12-28-2015 12:04 PM

http://www.diodedynamics.com/images/...ard_purple.jpg

Diode Dynamics 01-05-2016 09:42 AM

http://www.diodedynamics.com/images/...board_blue.jpg

Beechnut87 01-10-2016 09:17 AM

Any issue with the glue when baking the headlights? I did a ROBO mod on my 3000GT and dealing with the glue was a pain and required the factory glue to be removed and new windshield adhesive to be installed to replace it and make things easier. Looks much easier in the video but that glue was a real PITA until i had a friend use a heat gun as i scraped glue out with a screwdriver!!

Diode Dynamics 01-11-2016 03:14 PM

Quote:

Originally Posted by Beechnut87 (Post 2504376)
Any issue with the glue when baking the headlights? I did a ROBO mod on my 3000GT and dealing with the glue was a pain and required the factory glue to be removed and new windshield adhesive to be installed to replace it and make things easier. Looks much easier in the video but that glue was a real PITA until i had a friend use a heat gun as i scraped glue out with a screwdriver!!

The BRZ uses rubber butyl to seal the housings. It's easy to work with, and shouldn't require too much effort to separate.

If you aren't confident in your ability to remove the lenses, we have a great network of authorized dealers: http://www.diodedynamics.com/store/i.../find-dealers/

Feel free to give us a call if you have any questions: (314) 205-3033

Thank you!
Nick C.

Diode Dynamics 04-20-2016 10:04 AM

http://www.diodedynamics.com/images/..._rgbw_side.gif

Diode Dynamics 04-28-2016 10:09 AM

http://www.diodedynamics.com/images/..._installed.jpg

brzzy 04-28-2016 11:19 AM

This would be awesome if there was a kit for the DRLS on a BRZ as well. Both controlled at the same time.


Sent from my iPhone using Tapatalk

Diode Dynamics 04-28-2016 04:42 PM

Quote:

Originally Posted by brzzy (Post 2636495)
This would be awesome if there was a kit for the DRLS on a BRZ as well. Both controlled at the same time.


Sent from my iPhone using Tapatalk

The BRZ's lower DRLs are much more difficult to open up. They aren't sealed the same way the headlight housings are.

Nick C.

Diode Dynamics 05-03-2016 10:09 AM

http://www.diodedynamics.com/images/...oard_amber.jpg

Diode Dynamics 08-04-2016 11:10 AM

http://diodedynamics.com/images/suba...board_cyan.jpg

Diode Dynamics 08-10-2016 11:25 AM

http://diodedynamics.com/images/glob...ye_Collage.jpg

Demon Eyes are small, high-power LEDs that illuminate the projector lens inside your headlight, for a unique, custom look. Our demon eyes are made in USA, and feature bright, full multicolor control and white!

They look great when paired with our RGBW boards, and can even be used on the same controller!

Click here to shop: RGBW™ Demon Eyes (Universal)

Diode Dynamics 08-18-2016 10:43 AM

http://diodedynamics.com/images/suba..._rgbw_cyan.jpg



2013-2016 Subaru BRZ Multicolor LED Boards


Nick C.

Diode Dynamics 09-01-2016 11:01 AM

http://diodedynamics.com/images/cust..._BlueDemon.jpg

Subaru BRZ RGBW LED Boards + RGBW Demon Eyes from 86Speed.com

Looking good!!

Nick C.

Diode Dynamics 09-28-2016 09:13 AM

http://www.diodedynamics.com/images/...c%20lights.jpg

Installed by Authorized Dealer: Visionz Lights

Nick C.

Diode Dynamics 04-03-2017 05:28 PM

http://www.diodedynamics.com/images/...tbrz%20(2).jpg

Project BRZ

Diode Dynamics 06-06-2017 09:24 AM

http://www.diodedynamics.com/images/...Headlights.jpg

Diode Dynamics RGBW LED Board Replacements & RGBW Universal Demon Eyes installed by: Evil Headlights

Nick C.

pancake 06-20-2017 11:27 PM

Quote:

Originally Posted by Diode Dynamics (Post 2923368)
http://www.diodedynamics.com/images/...Headlights.jpg

Diode Dynamics RGBW LED Board Replacements & RGBW Universal Demon Eyes installed by: Evil Headlights

Nick C.

Can you use 1 remote for both the boomerang and the Demon eyes?

Diode Dynamics 06-21-2017 10:05 AM

Quote:

Originally Posted by pancake (Post 2932453)
Can you use 1 remote for both the boomerang and the Demon eyes?

Absolutely! The RGBW controller can control multiple items. However, you will need to purchase a separate controller if you wish to change them independently from one another.

Thank you for asking

Nick C.

pancake 06-21-2017 10:10 AM

Quote:

Originally Posted by Diode Dynamics (Post 2932634)
Absolutely! The RGBW controller can control multiple items. However, you will need to purchase a separate controller if you wish to change them independently from one another.

Thank you for asking

Nick C.

OK, cool -

Does this make the boomerang on/off completely manual?
By that I mean, will it no longer turn on (white) by itself during nighttime driving?

Diode Dynamics 06-21-2017 10:12 AM

Quote:

Originally Posted by pancake (Post 2932637)
OK, cool -

Does this make the boomerang on/off completely manual?
By that I mean, will it no longer turn on (white) by itself during nighttime driving?

This kit can retain OEM-like functionality. It will stay on whatever color you left it on, so ideally white for road-use.

Thanks!
Nick C.

Diode Dynamics 06-28-2017 03:40 PM

http://diodedynamics.com/images/cust..._brz%20(2).jpg

Diode Dynamics Subaru BRZ RGBW LED Boards Installed!

Instagram: @ ajs_brz

Diode Dynamics 08-02-2017 08:50 AM


Diode Dynamics 08-03-2017 10:04 AM


Diode Dynamics 08-23-2017 05:13 PM


Diode Dynamics 08-24-2017 10:26 AM

http://www.diodedynamics.com/images/...0@1slow86_.jpg

Diode Dynamics RGBW BRZ LED Board Replacements installed

Owner: @ 1slow86


Diode Dynamics 10-04-2017 11:53 AM


Diode Dynamics 10-12-2017 10:53 AM


Diode Dynamics 11-20-2017 04:21 PM

[ame]http://www.youtube.com/watch?v=IITw-o0w9no[/ame]

Diode Dynamics Bluetooth RGBW Controller Overview

New! Made in USA!


Diode Dynamics 12-05-2017 12:40 PM

[ame]http://www.youtube.com/watch?v=ICNoBzzUAzc[/ame]

How to Install Diode Dynamics Bluetooth RGBW Controller with Existing RGBW Products

WishfulThinking 08-26-2018 03:48 PM

Is it possible to put the multi color LED boards into an FRS?

Diode Dynamics 08-27-2018 11:58 AM

Quote:

Originally Posted by WishfulThinking (Post 3125963)
Is it possible to put the multi color LED boards into an FRS?

The Subaru BRZ LED Board replacements are designed specifically for the OEM BRZ's headlights. There's no board to replace in the FR-S' housings (until the later model years and special editions).

Unfortunately, the BRZ boards aren't compatible with the FR-S housings.

You can however, add these to your FR-S: Diode Dynamics HD LED Halos for 2013-2015 Scion FR-S (pair)

Thanks!
Nick C.

Diode Dynamics 10-23-2019 04:08 PM


Check out our latest video to learn more about everything we do here at Diode Dynamics to offer you the best and brightest LED lighting upgrades!

Shoot us a PM for free USPS shipping on any U.S order!


Jake H.
Diode Dynamics

Diode Dynamics 11-25-2019 12:55 PM


Don't settle for generic LEDs! Diode Dynamics Multicolor and Switchback LED DRL Boards are fully designed, tested, and manufactured in St. Louis using the best components available. Additionally, we back every LED upgrade we offer with a 3-year worry-free warranty!

Don't forget to shoot us a PM for free USPS shipping on ANY U.S order!


Jake H.
Diode Dynamics

Diode Dynamics 11-26-2019 03:48 PM

Don't forget to shoot us a PM for FREE SHIPPING on any U.S order!


Jake H.
Diode Dynamics

Diode Dynamics 11-29-2019 12:09 PM

Don't forget to shoot us a PM for FREE SHIPPING on any U.S order!


Jake H.
Diode Dynamics

Diode Dynamics 12-02-2019 07:15 AM

Don't forget to shoot us a PM for FREE SHIPPING on any U.S order!


Jake H.
Diode Dynamics

Diode Dynamics 05-21-2020 05:54 PM


Our Memorial Day sale starts NOW! Today through Friday, 5/29/2020, save 20% on all LED upgrades, including our Multicolor and Switchback LED Boards by entering coupon code "USA20" at checkout!


Collin
Diode Dynamics

Sale ends 11:59 p.m. CST on Friday, 5/29/2020. Cannot be combined with other coupon codes.


All times are GMT -4. The time now is 07:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.