![]() |
What do you recommend with these tires
Have some good grippy tires 215/45/17s on my frs at the moment which are the same tire size as stock.
Looking to buy wheels, what wheel size do you recommend? I was thinking 17*7+46 but that is really similar to the stock wheel. What do you guys recommend? 17*8??? Or |
If you intend to keep using 215 width ones .. better stay with stock size wheels aswell. The wider the wheel, the heavier.
|
Quote:
Unsure if they will fit however |
Quote:
|
Two favourites:
Rota Titan 17x8 et42 Fox FX005 wheel 17x7.5 et35 Look good (concave), not too wild fitment, light (7,7 and 7,4kg resp) and not too expensive. |
Quote:
|
[QUOTE=Trettiosjuan;2455994]Two favourites:
Rota Titan 17x8 et42 Fox FX005 wheel 17x7.5 et3 Do both these fitment 215/45/17 easily |
Dude search the massive wheel and tire section. It has every combination of wheel and tire you can think of.
|
Quote:
|
Quote:
|
i would try to find a set of 17x8 +30
|
Honestly, I would skip straight to a 17x9 and wrap them with 245/40r17's or even a 255.
|
You should look through galleries and find wheels you like. 17x9 with 225 tires seems to be the performance sweet spot for NA cars. I'm sure an FI car would want more tire. Going for looks is a totally different thing. Also, camber and having coilovers will affect what fits.
|
Quote:
Heard its best for performance aspects |
Quote:
|
Quote:
If I were to upgrade from stock wheels, I'd get 17x9 +35 to clear the stock shocks. |
And for the record, I own 3 sets of OEM wheels but nothing aftermarket.
|
If I were to upgrade from stock wheels, I'd get 17x9 +35 to clear the stock shocks.[/QUOTE]
My only concern about that option is will they defintely fit easily |
Quote:
|
joey999: btw, you should first state, how you intend to use your car. Only daily driving or track days only, or some mix of them? And what power you'll have, stock NA or forced induction? Any plans on using wider tires in future? Do you want to keep stock-like easy to poweroversteer or ok with tramlining? Be more descriptive as to where your preferences lie. Otherwise seeing advises like "some guy racing on track got best results on X size of tires" is hardly usable if eg. you won't ever race at all.
Only facts i've seen from you were: having stock 215/45/17 tires you need wheels to fit on, and that you want a bit of wider/"agressive" looks and value looks a bit above weight increase. |
Quote:
car is a daily driver, no plans of forced induction any time soon. Just wanna know a good wheel fitment that looks good with those tires |
If no forced induction, and no auto-x/trackday plans, then i'd stay with narrow tires & wheels for sake of keeping car character. Will be cheaper aswell. At most a bit different offset to get tires more flush and that's it, no need for senslessly uber wide ones. Somehow hadn't noticed people actively looking below car to check width and booing everybody below their .. 'standards'. Seeing that you intend to use tires of stock size, just get fitting 17x7/7.5/8 wheels of whichever model you like looks of and call it done. Sidegain of not oversized wheels - they weight less, hence (especially if lighter then stock) you may get better acceleration/braking/better suspension.
|
Quote:
|
Quote:
Why do people choose bigger wheels but if performance is decreased? Does it really look better :/ |
Quote:
|
joey999: beauty is in the eye of beholder. To me overly wide wheels/tires without actual need for them looks like wannabe posing. I guess thinking may go along the lines "if i have wheels like those ferrari-s/porsches/lamborghini/koenigsegg/maclaren" "my cheap coupe will become as cool as those", or "if it works for much more expensive exotic sportscars it surely must be better on mine too", ignoring actual impact on car at hands resulting performance / specifics / optimisations. Very similar situation is with going for staggered setup, despite how many advise against. "I must install these" "no matter what".
Yes, there are some scenarios where wide & grippier tires are of benefit, such as mentioned auto-x racing in hands of experienced driver that can use fully all grip available at going >9/10, or if you noticeably rise engine performance with forced induction and so on .. but imho it's just for 1:10 from all of those that install those wider ones, with most doing just and only for looks in way what looks cooler in their eyes, not of practical sense. For your described usage scenarios imho no sense in doing such things. |
| All times are GMT -4. The time now is 04:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.