|
1320 Performance UEL Header?
Anyone running this or know anything about it? Haven't been able to find much info aside from what's on their website. I was going to go with Tomei, but just can't beat the price of this one.
http://1320performancestore.com/head...product_id=214 |
Looks like a quality piece, especially for the price
|
Collector looks decent also
|
Now that's a reasonably priced header!
|
2.5 inch? 3 inch?
|
every time I see something so much cheaper than the competition (not including the cheap-o stuff), I start wondering why it's so cheap.
|
I'm actually in a group-buy for this header right now. 1320perf. Makes some good products. All of ours are currently being built to order. All headers are *essentially* the same, and this one is a quality looking collector. Sometimes the name doesn't matter. Borla has been having some quality issues with cracked welds, etc. I will let you know once my group buy is complete and so get it installed what I think.
|
Has anyone out this on their vehicle yet? If so what are the results and are you happy with the purchase?
|
It's out of stock on the website, is there a link to the group buy @Rifle
|
Quote:
|
They have a picture of a GTR sitting outside their shop. Seems legit.
|
Quote:
https://www.facebook.com/groups/mida...5574551572373/ Header should be arriving this week (hopefully!), and I should have it installed by Sunday if everything goes accordingly. Just for a list of what I have/what I'm doing: Current: Blitz Drop In Invidia N1 Catback Tuned@93Oct Hopefully by Sunday put on: 1320Performance Catless UEL Header Power Driven Overpipe Berk Hi-Flow Catted Front Pipe -------------- Current issues I've heard about the header - it's 5mm off from stock OP, causing small leak for some, but with thicker gaskets (grimspeed which I bought) there should be no exhaust leak/fixed. |
Quote:
I contacted the company and some OP's such as the Tomei will not be compatible so be careful. I'm waiting it out and getting the 1320 Over Pipe coming out in a few weeks to make sure it's a perfect fit. They're giving $50 off for everyone who bought the header, so only $75 for an OP is pretty amazing deal. But from what I've seen and read on here, it looks like this is a quality piece for the price. I wasn't going to put another grand into the car, but <$500 total for header and OP sounds like a deal to me. I will update as well once I got mine on. I'll be running the following setup: Invidia N1 1320 Header (w/ Grimmspeed Gaskets) + 1320 OP Grimmspeed Intake ECUtek Tune |
1320 makes some quality stuff for the money.
|
This kills the CNT uel then just looking at the collectors, this is a way better bang for the buck, thing I'll pick this one up then if the reviews are good.
|
Quote:
|
|
To bring this thread back up, getting my header installed tomorrow, along with a no name OP, Berk catted FP, and updated tune for 93. I'm going to try and make a stock N1 vs header back N1 exhaust video.
http://www.ft86club.com/forums/showt...53#post2413453 |
4 Attachment(s)
Got my 1320 UEL headers & 1320 OverPipe (pre production) today!
weights : 6.30kg (13.89 lbs) for headers, 1.42kg ( 3.13 lbs) for Overpipe Seams to be a great value for money! thanks to Jeff and 1320 Performance! :thanks: |
Quote:
I think it's funny that people often write something off or are so skeptical because of the price. I mean I get it, but I don't think price always equals the quality of the part. No name companies have to make a name somehow. |
Anyone got this on yet? Tuned? Dynoed? I am thinking of grabbing one. I wanted to go turbo, but I may wait a while to do that so I am looking for a header.
Also, PLEASE post a sound clip vid if you have it on. Thanks! |
Quote:
How did the install go with stock front pipe? I heard it had issues with stock over pipe but it looks like you took care of that by ordering their overpipe |
Quote:
|
Quote:
No biggie, was just wondering I'll be ordering either CNT, OFH or 1320 in 5-6 months checking all the options.... |
I'm doing the same as maca. Do I get impatient and order the cnt or gruppe or do I wait for the 1320
Sent from my HTC One M9 using Tapatalk |
Quote:
|
Quote:
Sent from my HTC One M9 using Tapatalk |
Now all you have to hope for is that they don't fall on their faces. When the twins first came out, a company in Beltsville, Md. came out with a header back exhaust system and a cat back system and they had a group buy which I got in (even before I had the car) and waited 70 days for the cat-back system. Several people who placed orders never (that I know of) ever got their systems. One guy was in Australia. Company moved to Baltimore area and were completely non-responsive to inquiries for the people trying to get their product. Not sure if they are still in business or not.........
|
I am trying to figure out which header to get. 1320, Gruppe, CNT, or OFH.
Gruppe is 2 3/8" and I was hoping for 2.5" because everything else is on my exhaust CNT has a meh collector 1320 has a long wait time OFH...Not sure. I think I like it. Any suggestions? Any stats on these headers yet? |
I've had mine installed now for about 1500 miles. This is my second header. The first header wasn't decked correctly on the flange, so it didn't seat correctly and caused an exhaust leak. My vendor swapped me another one and I was good to go. Overall impressions, for $350, I believe it was truly worth it. I'm etuned with @moto-mike, stage 2, 93 Oct. it definitely "feels" faster. I have yet to dyno it, so no actual results. Maybe one of these days I'll swing up to Moto-east for a few pulls.
Other than that, I have it paired with a PLM overpipe, Berk Catted Front Pipe and an N1. And it's loud. Very, very loud. But I love it. :) |
I just ordered mine today hopefully it doesn't take forever to get them.
|
So installed the header this weekend and I must say I am really happy with it welds were great and the sound is soooo much better than the EL I had on before. Power is relatively the same but I will see if I can get any more out of it with tuning.
|
Quote:
|
not yet not sure where it would come from though
|
Quote:
I replaced only engine to header gaskets and headers to overpipe gasket. Quote:
and stock firmware ZA1JA02G ( not yet tuned ) Quote:
Here you can find a couple of video, first is a cold start and second one an hill road test. Keep in mind, I've changes ONLY headers and overpipe, while frontpipe-midpipe-muffler are stock ( and not TDR or STI version ), i'm only search for a bit more "Subaru rumble" sound and torque gain in 3500-4500 for my daily car. 1) https://youtu.be/YtkrB7Hcv7A 2) https://youtu.be/cOOGsDEUSRs |
Quote:
Sent from my HTC One M9 using Tapatalk |
Anyone have the 1320 header/op with invidia fp and q300?
I want to make sure it all lines up correct and a sound review would be nice |
Quote:
|
This really died out. How did they end up?
|
Quote:
You also need their overpipe which dont make clear as it is a different length then stock |
| All times are GMT -4. The time now is 06:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.