iJDMToy Valenti Brake Light.
 

Any video or better guides/instructions to have the V-Light go on?!
I have the running light on and reverse lights on.
Anything im missing or doing wrong ?
Bought this from the iJDMToy store in Los Angeles.

You have to wire tap a wire from valenti brake light to make the red V luminate. Here's the video I used to install mine. [ame]http://youtu.be/0jrFASjxwWQ[/ame]

HELP PLS
 

So my reverse light works and the top triangle brake light works, but the long running light that is shaped like this -------v------- doesn't work, which connection am i messing up that would cause that not to work?

Which one you get the Valenti from Japan or Valenti style one from ijdmtoy


Sent from my iPhone using Tapatalk

The IJDMTOY one, which connection is responible for the long middle light to be running with the running lights on the tails. Thank you for the help btw

Just tap the brown wire to the running top triangle light and should light it up. Cuz the blue wire is tapped to oem wires, just tap the brown to that one and leave it as it is don't connect it anywhere else but that blue one I think it's blue lol if you can't I'll send a pic of how my wires look


Sent from my iPhone using Tapatalk

Attachment 109220


Sent from my iPhone using Tapatalk

My top triangle doesn't run, it's only for braking, the middle light is the only one suppose to he running I believe

Nice pic. Nice to see the 5 Axis and buddy clubs on the silver. Are the BC tails smoked?

Car is a WhiteOut. The picture is filtered here's the original. Attachment 111158


Sent from my iPhone using Tapatalk

iJDMToy Valenti Brake Light.
 

Got the V light to be running light and brake light to function now. Attachment 113933


Sent from my iPhone using Tapatalk

Hey, I have the same reverse light as you but my triangle stays on the whole time. How did you wire it so that the triangle goes on with the brake?

Currently the led bar and triangle are always on together.

V light should be hooked up to parking light and triangle to the brake light.

Stuck on wiring
 

I'm having the same trouble you had except on mine the V or anything won't light up I'm a little confused on which wires go where. I'm trying to run it with the tails and brakes applied. Can you help possibly? When I unlock and lock the car the V seems to light up along with the emergency hazards.

Pics of your wiring can I see ? Sounds like you have the v light wired up as a turn signal , that happened to me the first time .



Sent from my iPhone using Tapatalk

this is a little off topic but how is this installed? wiring wise, like I know you pull the factory wiring out from the OEM reverse light. but does the IJDMtoy wiring fit just like the OEM? does it fill the hole with a rubber plug where the wiring exits the vehicle? Does it also have an OEM plug where it plugs into the OEM reverse light wiring

No it doesn't from what I remember it just goes through the hole once you removed the oem wire. The wire that comes with brake light plugs right into the oem cable inside the trunk area.


Sent from my iPhone using Tapatalk

ehhh i spent more money for the nice, more clean valenti one.

We all have different likes & taste, congrats on the nice, more clean valenti brake light.


Sent from my iPhone using Tapatalk

i know the valenti one blinks when you press the brakes but the iJDMToy does not. Is that correct?

Yes. It's also worth noting that unless you're willing to pull your valenti 4th brake light apart and do some re-soldering, the "V" only comes on with the blinking triangle. The ijdmtoy brake light turns the "V" on with the running lights and the triangle works with the brake lights, as you'd expect. Works great, looks great, glad I went with ijdmtoy over valenti for mine, but all depends on what you want.

omg good thing I found this thread. I just placed my order on the iJDMtoy one too. Great thing theres good reviews about them!

iJDMToy Valenti Brake L
 

good job man.
i wanted to fab my own led 3rd brake light but when i saw tony selling them, just got that instead.

so on the hatch the cover cant be installed back?