Evasive FT86 Service & Maintenance Thread Discount Labor for FT86 Members
 

http://www.speedhunters.com/wp-conte...ive-FRS-01.jpg

Service & Maintenance

Evasive Motorsports would like to give another introduction of our service department to both current and new members of the FR-S or BRZ community. Most of FR-S and BRZ members are aware of service we provide but to those who aren't, we provided a list our most common services. Our knowledge and experience allowed us to be capable of diagnosing and rebuilding everything from engine/transmission rebuilds to diagnosing suspension and chassis issues. We also stock full inventory of Motul, Amsoil, along with Project Mu and Endless brake fluids. Established in 2002, Evasive Motorsports has been bringing the best quality parts and customer service in the aftermarket industry for over a decade. Evasive Motorsports is a HKS Pro dealer (only 6 in the nation), Master EcuTek dealer, and has been building race cars since its inception. Evasive Motorsports has tackled Pike's Peak International Hill Climb in its Scion-backed FR-S, the fastest supercharged FR-S to complete the race to date. Evasive also has a Subaru BRZ which has broken the 2min mark at Buttonwillow Raceway, being the first daily driven NA ZN6 car to do so. Evasive Motorsports' services include installation & maintenance, race alignment, fabrication, dyno tuning. It is truly your one stop shop for all your FR-S and BRZ needs.

Our facility operates Monday-Friday 9am-6pm. Feel free to PM or call us at (626) 336-3400 if there are questions or services you would like to have done that may not be listed below. (Note: Pricing below is for service only and do not include parts unless specified.)

http://img.photobucket.com/albums/v6...psc6dffb4f.jpg

Basic Service & Maintenance

Oil Change - $95.00 (includes Motul 8100 ECO 0W-20 or Amsoil and genuine Subaru oil filter)

Spark Plugs -$320.00 (Plugs not included) (+$110 HKS Super Fire Plugs)

Transmission - $70.00 (Amsoil 75w90 or 75w90 Gear 300)

Differential - $60.00 (Motul Gear 300 or Amsoil Severe Gear 75w90)

Coolant Flush -$125 (Toyota 50/50)

Brake Bleed - $125.00 (includes Motul RBF600)

Brake Lines Install - $250

Pad Install - $70 Front $70 Rear $100 for both

Brakes & Rotor Install - $130.00

Intake - $50.00-$100 Depends on Intake System (starting, intakes that require bumper removal is extra; Call/PM)

Exhaust - $75.00

Over Pipe - $50

Header - $125.00 (header wrap extra)

Pulley Install - $125 Crank / $200 Full Pulley Kit

Clutch - $500 (fluids not included or clutch)

15k/45k Service - $240.00 (includes Motul 8100, Subaru oil filter/MTF, Diff (Motul Gear 300), inspect brakes/belts/fluids/air pressure/joints/seals - top off all fluids)

30k/60k - $430.00 (includes genuine Toyota coolant/air filter/accessory belts in addition to 15k Service items listed above)

Major Service

TSB S-SB-0033-13 $1700
Hard Start, Rough Idle, Camshaft Sensor or Misfire DTCs
TSB S-SB-0033-13 Toyota Chain Cover Assembly TOY-SU003-04572 + Oil Change + Coolant Flush

DI injector Swap $1000
Plus Parts

Suspension & Drivetrain Components

Alignment - $90.00 (any spec)
(+$25 if you have camber arms)

Corner Balance - $250 (includes 4-wheel alignment)
(+$25 if you have camber arms)

Coilover - $180.00 for pre-assemble coilovers with top hat (coilovers w/o top hats - i.e. KW / JRZ / Motons (+$20)


Springs/Shocks - $200.00

Sway Bar - $60.00/each

Differential Collars - $100.00

Rear Lower Control Arm - $125.00 (Cusco and Stance)
(SPC $180 Need to press bushing out)

Front Roll Center - $200 (need to press bushing out)

Under Brace - $50.00

Final Drive - $900.00 (additional $150.00 if diff needs to be taken off car) (fluids not included)

Aftermarket LSD - $375.00 (additional $150.00 if diff needs to be taken off car) (fluids not included)

Final Drive + LSD - $1350.00 (fluids not included)

Bushing Kit replacement - PM/Call

Exterior & Aero Service

Tire Mount/Balance - $20.00/wheel

Tire Dismount - $5.00/wheel

TPMS - additional $10.00/wheel

Fender Roll - $75.00/corner

Roll Bar install - $800 (Cusco)

Full Cage install - $1200

Steering Wheel/Hub install - $125

GT Wing install - $125.00

EVS Custom Front Splitter - PM/Call

EVS Custom Flat Belly - PM/Call

EVS Custom Roll Cage - PM/Call


Supercharger Kits or Turbo Kits Install - PM/Call Starting at $600-$1000 Depends on which kit.

(Also buyers get a discount on install if kit is bought from us)

Fuel system Install - $300
-Injectors and Fuel Pump

Dyno Pull - 3 pulls - $100

Address: - 11829 Hamden Place, Santa Fe Springs, CA 90670 (main intersections Pioneer/Telegraph)

Web: - www.evasivemotorsports.com

Blog: - blog.evasivemotorsports.com

Evasive Service Calender

Hours of Operation: Monday-Friday 9am-6pm

Contact: (626) 336-3400

Email: joshua@evasivemotorsports.com or randy@evasivemotorsports.com


http://img.photobucket.com/albums/v6...psc8d2d86b.jpg

http://img.photobucket.com/albums/v6...ps19803f6a.jpg

http://img.photobucket.com/albums/v6...ps49c7d151.jpg

http://img.photobucket.com/albums/v6...pscd3416e7.jpg

http://img.photobucket.com/albums/v6...psc358ceb1.jpg

http://img.photobucket.com/albums/v6...ps0c71c346.jpg

http://img.photobucket.com/albums/v6...psbfc87dba.jpg

http://img.photobucket.com/albums/v6...ps4b765aac.jpg

http://img.photobucket.com/albums/v6...ps4bb898aa.jpg

http://img.photobucket.com/albums/v6...ps4a08065a.jpg

http://img.photobucket.com/albums/v6...ps604c5e30.jpg

http://img.photobucket.com/albums/v6...psfd72501a.jpg

http://img.photobucket.com/albums/v6...ps1c1f7f6d.jpg

http://img.photobucket.com/albums/v6...ps9145fd03.jpg

http://img.photobucket.com/albums/v6...ps80968030.jpg

http://img.photobucket.com/albums/v6...psa8786d9d.jpg

http://img.photobucket.com/albums/v6...psabcaa179.jpg

http://img.photobucket.com/albums/v6...ps4e3d71f0.jpg

http://img.photobucket.com/albums/v6...ps10bc90fb.jpg

http://img.photobucket.com/albums/v6...ps5a341d1e.jpg

http://img.photobucket.com/albums/v6...psfb4ab006.jpg

http://img.photobucket.com/albums/v6...ps8f2c59a3.jpg

http://img.photobucket.com/albums/v6...psc6f8c95d.jpg

http://img.photobucket.com/albums/v6...ps327e22f2.jpg

http://img.photobucket.com/albums/v6...ps6c27c452.jpg

http://img.photobucket.com/albums/v6...ps815488d9.jpg

http://img.photobucket.com/albums/v6...pse6f8c894.jpg

Pretty decent prices...

Wish you were in San Francisco or around the bay area. :(

Sent from my HTC One XL using Tapatalk 2

Wow I didn't know you guys did all this too.. wtf... better late than never. +1 for a great shop, been there before and would be very pleased to keep doing business.

I think I'll be stopping by from time to time.

I imagine a Vortech supercharger won't be too difficult.

Not a problem :party0030:

-Randy

Not a problem Jared how is that exhaust coming along? Sound really good when it left. :thumbup:

-Randy

We have customer that drive down all the time! :thumbsup: If you are down here stop on by.

-Randy

will you guys be open this comming monday with it being a holiday? If so I need some goodies installed and your shop looks great. Plus I really would love seeing your car in person!

Looks pretty good!!!

Yes we will be open! Come on by!

-Randy

I recommend Evasive need to have Saturday schedule because that is the day many customer will come for service or leave the car there for many services. As an 86 car owner I really want to see you guys on Saturday to do serveral upgrades aftermarket but you guys close while many other autoshops all open on Saturday.

Beautiful shop

Give us a call 626-336-3400 maybe we can work something out. You also can drop off your car on a weekday after work and pick it up the that day.

-Randy :party0030:

Awesome! I'm looking for a shop somewhat near me that I can trust to do some good work.

1. Are you guys open Sat/Sun? If so, what hours?

2. How much would you guys charge for a B pipe exchange. I'm donig some prototype work for Perrin and need to change out just the B pipe. Basically, put car in the air, loosen 4 bolts, put the prototype B pipe in (2 gaskets included) and bolt the new one in.

Thanks.

+1 to Sat/Sun hours.

What would the upcharge be to go to 300v or similar fluid for the tranny?

Nathan

this is awesome thank you!

Any chance of doing the tranny and diff fluid changes after the dyno on the dyno day coming up?

I'll +1 this. It's the only way I'd ever be able to make it to you guys. :(

No reply to my question above?

We only are open Mon-Friday.

Sorry guy we are only open Mon-Friday.

<3 you guys, think I gotta call you today for my first frs maintenance...

@evasivemotorsports is it possible you guys could give rough estimates of customized lips? just a rounded ballpark?

How much to install 2008 STI calipers and matching rotors?

No I haven't ordered them yet. Want to give me a good deal?

Wow so how much would it cost for me to get Eibach sportlines installed with an alignment? I may just make the drive down from the bay.

Can I get a pm on price it would be to get whiteline rear subframe positive traction kit inserts and gear box shifter installed?

I went to one of your dyno days recently and really liked the open and welcoming feel from your company/employees. I see you offer free install on exhaust and coilovers purchased through you, but some of us enjoy working on the car but have no garage to do this on our own. Would you consider allowing a customer help with the install or rent a lift/tools by the hour for simple installs like this? I wouldn't ask to rent this unless I purchase the parts from you, but I figure one tech over seeing the install would be the same cost to you as one tech doing the install. What do you think?

Need a alignment for the track or street? Give us a call!
@BOYCE sweet FR-S!
http://www.ft86club.com/forums/attac...6&d=1360825232

Im in need of an alignment! Ill be giving you guys a call soon :D

Need Custom Fabrication? We can do all work in house.
http://img.photobucket.com/albums/v6...psfb014aa4.jpg

this might be a really dumb question, but since you guys offer custom splitters, could you guys possibly make a custom diffuser? like a j's racing one for the s2k or maybe even a spoon style? i have yet to see an aggressive diffuser like those

We can make anything happen here.

New carbon front splitter for the Evasive Scion FR-S. Crafted by our team in-house here at our facilities. — at Evasive Motorsports.
https://sphotos-b.xx.fbcdn.net/hphot...40200671_o.jpg
https://sphotos-a.xx.fbcdn.net/hphot...43623960_n.jpg

You have PM! thx!

Man you guys have great pricing! Are the prices listed hourly or the flat rate?

Most of them are flat rate. But labor we do charge different if its custom work.

-Randy

Need Service? Arqray Schaeferhund Exhaust on the JDMEGO FR-S
https://sphotos-a.xx.fbcdn.net/hphot...64192344_n.jpg

What about the front lip?