Auto Shifting in Manual Mode
 

So I just received the lovely engine check light on my A/T FR-S, and whenever I'm in manual mode, it's auto shifting at around 7,100 rpm. Anybody know the reason why or how to fix it?

Thank You,

CEL disables a lot of stuff, may include flappy paddles.

You need to find out what is actually causing your CEL first.....


Either get your own code reader or see if your local auto parts shop will let you use theirs. Once you know what the code is it will be a lot easier to fix the problem.....


Just to eliminate the possibility, are you sure that you did not set your rev limiter at 7,100? That might force it to upshift on you even with 100% throttle in manual mode. Probably not a good idea to keep revving it up to 7,100 while you have a CEL as well.....

I reset the battery last night, and the CEL was gone, but after driving for about 15 miles this morning it came back again. It's just really weird because my car is an A/T but when I'm in Manual it reacts like its in A/T and just auto shifts instead.

Anytime you disconnect the battery it will probably clear those CEL codes. When the light shows back up again after it was cleared you have some type of problem.

You and us need to know what code you have so we can try to help. A CEL can pop up from so many different things ranging from your gas cap not being tightened to a rod punching a nice hole in your block. Once you have the code google it as someone has most likely ran into it before and you will probably find out if it is something trivial or something you should be concerned about

EDIT: To somewhat amend my earlier post: I have an A/T as well. Even if you set the rev limiter it will just bounce off of it and jerk the car in manual mode so it should not be auto shifting.

Go to autozone, they will tell you the code for free. Then tell us the code. Or google the code.

I just bought an OBDII scanner, and the code is P0171

Code is P0171, also checked my intakes, everything is very tight, so nothing is loosening.

P0171 is running lean. Do you have any mods on your car such as header, tune, or intake?

I fixed it, one of the tiny hose from my intake was leaking I didn't even see it lol.

Thanks for all the helps guys.

Not to rob the thread but i also have a a/t and when im in manual mode and have the vsc sport on and hit heavy traffic i get a code(dont remeber which one) but its for the cam shaft positioning sensor or something along those lines

Sent from my SGH-T999N using Tapatalk

Time for a part out

Dibs

On the tires.

Take that shit to a dealer ASAP.

on a side note OP why the fuck would you drive the piss out of a car with a CEL you had no idea what it was? :bonk: :bonk: :bonk:

subscribed to this thread, this seems like a very interesting thread http://juragan.club/1/g.png

I have several times and they always say its a loose gas cap, thay code only came up twice tho

Sent from my SGH-T999N using Tapatalk

Same dealer? try a different one

If it comes up again i'll go take it. Whats it mean though ?

Sent from my SGH-T999N using Tapatalk

Idk, but it shouldnt do that and a cam shaft CEL sounds bad. I wouldnt risk it personally. Unless you knkw the gas cap really was loose lol

The dealership made a case with scion hq and everything, they flew their master tech out to look at the car, they told me it was a loose gas cap at least thats what the master tech and service manager said to me at least

Sent from my SGH-T999N using Tapatalk

Tried to find post on that code but came up short of nothing

Sent from my SGH-T999N using Tapatalk

That sounds like some master tech!