Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 5 of 7 1234 5 67
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Driveshaft Shop CF + Kartboy SS Conflict. (https://www.ft86club.com/forums/showthread.php?t=62227)

Binary_fission 03-08-2016 01:19 PM
Quote:
Originally Posted by Anthony (Post 2573265)
Just kidding. I just watched that second video I posted and remembered the black plate with the 4 bolts doesn't determine the height of the shifter. So... grinding it is still my only idea.
Thanks for the feedback, one of the friends told me about that idea of putting washers but we were worried about geometry and such. If there's no other work around this thing I'm probably ganna sell KB and go with TRD ss .

Sent from my SM-N910T using Tapatalk

DustinS 03-08-2016 01:56 PM
Quote:
Originally Posted by Binary_fission (Post 2573285)
Thanks for the feedback, one of the friends told me about that idea of putting washers but we were worried about geometry and such. If there's no other work around this thing I'm probably ganna sell KB and go with TRD ss .

Sent from my SM-N910T using Tapatalk
FWIW I remember people having the same issue with the TRD as well.

Anthony 03-08-2016 05:47 PM
Quote:
Originally Posted by Binary_fission (Post 2573285)
Thanks for the feedback, one of the friends told me about that idea of putting washers but we were worried about geometry and such. If there's no other work around this thing I'm probably ganna sell KB and go with TRD ss .

Sent from my SM-N910T using Tapatalk
Why don't you want to just shave the linkage out of the way?

AZbrz89 03-09-2016 09:55 AM
Quote:
Originally Posted by Anthony (Post 2573696)
Why don't you want to just shave the linkage out of the way?
The trd ss will not work. I have the kart boy and it's the only ss kit that's compatible with the driveshaft shops drive shaft. I got the aluminum one though so idk if that makes a difference compared to the carbon fiber

Sent from my SM-G920V using Tapatalk

Binary_fission 03-09-2016 10:21 AM
Quote:
Originally Posted by AZbrz89 (Post 2574406)
The trd ss will not work. I have the kart boy and it's the only ss kit that's compatible with the driveshaft shops drive shaft. I got the aluminum one though so idk if that makes a difference compared to the carbon fiber

Sent from my SM-G920V using Tapatalk
How so, I have kartboy ss and I just installed driveshops aluminum driveshaft and on second and fourth gears it grinds, I put my stock shifter back on until I figure way to make kartboy compatible

Sent from my SM-N910T using Tapatalk

AZbrz89 03-09-2016 12:13 PM
Quote:
Originally Posted by Binary_fission (Post 2574438)
How so, I have kartboy ss and I just installed driveshops aluminum driveshaft and on second and fourth gears it grinds, I put my stock shifter back on until I figure way to make kartboy compatible

Sent from my SM-N910T using Tapatalk
Ya my 2nd gear is a little difficult but from what I read it's normal on 2nd gear

Sent from my SM-G920V using Tapatalk

Binary_fission 03-09-2016 12:34 PM
Quote:
Originally Posted by AZbrz89 (Post 2574594)
Ya my 2nd gear is a little difficult but from what I read it's normal on 2nd gear

Sent from my SM-G920V using Tapatalk
Putting in gear is not the problem here, its the part of the shift linkage griding on the driveshaft and making rattling noise.
If you have kartboy ss and driveshops driveshaft I don't know how you are not griding.

Sent from my SM-N910T using Tapatalk

AZbrz89 03-09-2016 01:01 PM
Quote:
Originally Posted by Binary_fission (Post 2574623)
Putting in gear is not the problem here, its the part of the shift linkage griding on the driveshaft and making rattling noise.
If you have kartboy ss and driveshops driveshaft I don't know how you are not griding.

Sent from my SM-N910T using Tapatalk
I have subs going when I drive so I don't hear anything really

Sent from my SM-G920V using Tapatalk

Anthony 03-09-2016 03:29 PM
Quote:
Originally Posted by Binary_fission (Post 2573285)
If there's no other work around this thing I'm probably ganna sell KB and go with TRD ss .
Why don't you want to just shave it out of the way?

Quote:
Originally Posted by AZbrz89 (Post 2574671)
I have subs going when I drive so I don't hear anything really
It's not just audible, the shifter shakes back and fourth.

Binary_fission 03-09-2016 03:40 PM
Quote:
Originally Posted by Anthony (Post 2573696)
Why don't you want to just shave the linkage out of the way?
Because that means I have to take it to the shop to have them shave it since I don't have tools to do it myself and that's ganna cost around 300 if not more.

Sent from my SM-N910T using Tapatalk

Anthony 03-09-2016 04:30 PM
Ah. You don't know anybody with a grinder? You could probably buy one for less than that and have it forever. Then you could grind all kinds of shit.

go_a_way1 03-09-2016 04:35 PM
Quote:
Originally Posted by Anthony (Post 2574983)
Then you could grind all kinds of shit.
OP get a grinder; the bitches love grinding shit

Anthony 03-09-2016 05:32 PM
It's just science.

TestaRD86 03-26-2016 05:06 PM
Trd won't work that's why I switched to kartboy short shifter. Im having some of the same using issues you do. Except only in 2, 4, 6 on bumpy roads I hear it rattle. I thought the dust cover might be catching but now I'm sure it's just too close.


All times are GMT -4. The time now is 04:39 AM.
Page 5 of 7 1234 5 67
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.