Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 5 of 22 1234 5 678915 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Wheel specs for Rocket Bunny Fenders (https://www.ft86club.com/forums/showthread.php?t=20429)

Scalzo 04-10-2014 01:31 AM
Quote:
Originally Posted by AznKirby (Post 1662026)
Look at those specs. Nothing will be "cheap".
If you want to spend less money, used wheels would be your best bet.

Edit: I've seen your build. Why would you want to put cheap wheels on that nice car?
I was looking at the forgestar f14s or f14f I have a budget of Max 2k$ for wheels

Sent from my Nexus 5 using Tapatalk

Maverick22 04-10-2014 05:37 AM
Quote:
Originally Posted by Scalzo (Post 1662015)
So if I want to run 17s or 18s I should go 18x9.5 +0 or -10 & 18x10.5 -30 to fit? I don't want to be slammed but no wheel gap.. What are some cheap wheels that will fit. BBS style
you might need -25 in rear.

Maverick22 04-10-2014 05:39 AM
Quote:
Originally Posted by CodyFRS (Post 1620401)
Thinkin about going with a set of 18x11 +20 square. Would these fit the rocketbunny fenders? or would I have turning radius problems up front?
you are going to need a 15-20mm spacer up front and a a 15-20mm spacer rear. you can't run anything wider than a 9.5 in front, however you can run a 11 inchwide rear. you will need to be careful with your tire size.

Maverick22 04-15-2014 07:04 PM
I updated post 14 with more accurate info.

Yamajee 04-16-2014 05:05 PM
Quote:
Originally Posted by Maverick22 (Post 1662227)
you are going to need a 15-20mm spacer up front and a a 15-20mm spacer rear. you can't run anything wider than a 9.5 in front, however you can run a 11 inchwide rear. you will need to be careful with your tire size.
18x11" in the rear and 18x9.5" fronts, you're correct, anything more and we start rubbing everywhere.

kal-el 05-04-2014 11:46 AM
Anybody can help me which setup best for RB v.2 planning on getyong weds maverick 605S couldnt figure out the inset [URL] http://maverick-weds.jp/605s.html#[URL]

Sent from my GT-I9500 using Tapatalk

KIMOJIxSTYLE 06-02-2014 03:46 AM
im getting me some weds orden too man and I might just do 18x9.5 -20 up front n 18x10.5-40, any one think this might be too much offset?

kal-el 06-03-2014 01:36 AM
Quote:
Originally Posted by KIMOJIxSTYLE (Post 1772595)
im getting me some weds orden too man and I might just do 18x9.5 -20 up front n 18x10.5-40, any one think this might be too much offset?
Hi bro really? I was told that they dont have aggressive offset like that? Please let me know if they have... cuz i was told different

Sent from my GT-I9500 using Tapatalk

KIMOJIxSTYLE 06-03-2014 02:54 AM
well if u go to evasive motorsport,, they do have some close to it,,, and if u go to weds.com open thier wheel selection size chart its all custom to ur liking,

Sent from my SGH-M919 using Tapatalk

jumbaco 07-11-2014 06:12 PM
Quote:
Originally Posted by Speed Element
15mm spacer up front. no issue with full lock

-Ryan
the 18x9.5 -15 is the effective offset after the spacer or is that before the spacer?

Speed Element 07-14-2014 01:14 PM
Quote:
Originally Posted by jumbaco (Post 1841872)
the 18x9.5 -15 is the effective offset after the spacer or is that before the spacer?
before to clear our bbk.

-Ryan

Kami Speed 07-14-2014 05:50 PM
Quote:
Originally Posted by kal-el (Post 1774634)
Hi bro really? I was told that they dont have aggressive offset like that? Please let me know if they have... cuz i was told different

Sent from my GT-I9500 using Tapatalk
Closest to that setup will be 18x9.5 -24 (4inch lip) | 18x10.5 -36 (5inch lip)

:thumbsup:

AznKirby 07-14-2014 08:09 PM
I'm planning on running
Front: 18x9.5 +26 (25mm spacers)
Rear: 18x10.5 +1 (25mm spacers)

I'm afraid the rear will be sunken in - not that I'm looking for massive amounts of camber, either. I know xdjdubx was running two spacers in the rear for a total of 50 mm with his 10.5, but that seems a bit unsafe.

Thoughts?

kal-el 07-23-2014 08:34 AM
1 Attachment(s)
Quote:
Originally Posted by Kami Speed (Post 1845905)
Closest to that setup will be 18x9.5 -24 (4inch lip) | 18x10.5 -36 (5inch lip)

:thumbsup:
I dont get their website.. the below is asnapshot of the wheels setups they have.. which one will have that 4 and 5 inch lips? Attachment 85860 i used google translate and it says insets

Sent from my GT-I9500 using Tapatalk


All times are GMT -4. The time now is 11:16 PM.
Page 5 of 22 1234 5 678915 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.