![]() |
Quote:
|
Quote:
Can I note- The wiring diagram says 6.3" for OEM doors ;P not that it matters. Also, in the diagram, I'm noting that basically, (off the amp at least,) the front speakers are all wired together, so if I do a 4 CH amp I'm good right? |
Somewhere is a post where someone removed the stock speakers and took pictures of the specs on back. Can anyone find that post and add it to this list? So far I am unsuccessful. :(
|
My stock speakers are somewhere since I have done my install. I can look tonight for them and see if I can get any good information off of them.
|
Thanks. I'm actually happy with the stock system and will just be adding a powered subwoofer. I'm interested to see what frequencies might be best left to the stock system and where I should cross over the sub. I think the stock 6.5 subs actually do decent mid-bass already.
Also if I decide to replace stock speakers, knowing what their specs are will make it easier to buy better ones. |
Custom sound in 86
Hi all
First post on here so i hope it goes into the right place! OK so how about the Australian 86 doesn't have a spare wheel (Bit odd I thought!) but it all made sense when I custom molded a fibreglass sub enclosure into it - including a 700rms JL Audio 5 channel amp with Morel 200rms front splits on custom spacers in the front and a single din Alpine head unit Leads for power and speakers are Stinger and cabled on opposite sides of the car to reduce/eliminate interference Some photos to follow - but sound is incredible and sub though only a 8 inch proves more than enough thump Cheers Scott |
Quote:
|
oh ... please also add my Thread in Audio Builds
http://www.ft86club.com/forums/showthread.php?t=47487 |
Quote:
:thanks: |
I'm getting my system upgraded =) stay tuned for another build thread.
|
Suggest adding these android HU threads?
Another Android Head Unit Another Android radio (KGL/Klyde/RoadMaster/GS/JY/MD) - Scion FR-S Forum | Subaru BRZ Forum | Toyota 86 GT 86 Forum | AS1 Forum - FT86CLUB |
Has anyone installed one of the small Focal FD amps yet?
|
6 pin harness
I've read somewhere in these posts about the unused 6 pin harness behind the stereo. It had constant 12 volt, an accessory 12v, a ground and a couple CAN signals. I can't seem to find the pin out. Anyone remember what thread this was in?
Edit: got the info needed. Pin 3 is 12V switched and pin 2 is ground. Powers an Alpine KPT amp pretty good. |
Quote:
|
| All times are GMT -4. The time now is 07:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.