Still has to try the reset before going that far.

Oops. Yup. I'll make it extra easy for OP.

Your move, OP .......:)


humfrz

My father is more knowledgable on the multimeter than me so he's gonna look into it tomorrow!

Did the reset not work? Remember, for the passenger-side window, the procedure must be done with the passenger-side switch.

Didn't work! Ill give it another shot today plus try and unplug the battery for awhile.

Nah, don't bother disconnecting the battery unless you need to for some other reason. You'll reset the ECU and will have a couple days of shitty throttle response on top of a dead window.

Alright since we are here, i have the same problem after i got new doors put in. I checked the fuses and did the initialization process for 30 mins once and nothing. Took it to the dealer they had no idea what to do. My driver side window goes up and down but no auto up or down and same for passenger if i got to the passenger side only and lower it and raise it fron there

Sent from my SGH-T999N using Tapatalk

At your own risk lol... i had my drivers side door replaced after an accident somewhat recently, I had a similar issue - partial roll down fine, but no up. I rolled them all the way down and held it until I heard an almost click sound, and then everything worked as usual amd rolled back up.

Not a troll post.. maybe a reset feature lol

That is the reset feature. :cheers:

Awesome, don't mind me reinventing the wheel over here. Also drunk post :cheers::slap:

lol Cheers :cheers::slap:

The reset doesnt work, ive tried, dealer tried and a few morr have tried. Sorry to thread jack

Sent from my SGH-T999N using Tapatalk