Where to find ignition wire? One that gets power at key position 2

[HRTROB]

Yes I've searched, but I couldn't find anything. Where can I find a wire that gets power on key position 2? It's the position just before starting the car, with the warning lights turning on.

I need to find this wire to use for my gauges. They're currently hooked up to the switched 12v wire from the radio. They work fine but my oil pressure gauge starts beeping when I put the key in ACC (Low pressure warning). I also use the ACC position to charge my phone at the track. I don't want the gauges and sensors draining juice from the battery as well.

I've read some guys tapping into the 12v outlet in the glovebox, but mine gets power in position 1 (ACC).

Mine also has the push start button so I doubt I can find the ignition harness under the steering column.

Any ideas?

[HapaHaole]

Here are your fuse choices,

10A ECU IG2, 7.5A Gauge, 15A AT , 1.5A IG2, 15A A/B main Those are the only fuses that are on the #2 aka IG2 circuit.
All these circuits are powered by the IG2 relay btw.