My 7MGTE MA61 Supra

[RyleyMA61]

Delete this if it's irrelevant:

Well I bought it like this, with a 7MGTE and full 3" exhaust from the turbo back.

I put the unpainted front nosecose back on for RWC and rego.
http://img82.imageshack.us/img82/7619/buffy3jo0.jpg
Then it blew it's 3rd (this one being metal) headgasket.
After some time someone decided it was cool to run into me.
http://img247.imageshack.us/img247/3010/p1060087zj9.jpg
Thankfully for insurance, it then looked nice!

Then I added a bigger intercooler and Ed's old brake and wheel pack:

Then it had all the paint and interior ripped out, and became this:



Then after three years, at Sandown the 4th headgasket went on the back straight at just over 200km/h.
So the engine was fully rebuilt w/ forged pistons and a full balance. New everything... Plus I did most of the work myself which was great fun.

1984 Toyota Supra
7M-GTE
W58 5 speed
New headgasket with aftermarket bolts and the proper torque

New Engine specs:
2990cc 7MGTE
Arias Forged Pistons (Std size)
ARP Head Studs
ARP Rods Bolts
8.4:1 Compression ratio
Fully balanced pistons, crank and rotating assembly
Cometic Multilayer metal headgasket
Gates Racing Timing Belt
ACL Race series bearings
New Timing belt idler and tensioner pulleys
New Water pump
600x300x76mm intercooler
2.5" flowed aluminium piping
aluminium Cold air induction in box in front guard
Full 3" exhaust and dump pipe
Exedy 5 puck sprung-centre button clutch
7MGTE flywheel redrilled, dowelled and balanced to fit
Custom throwout yolk and assembly
Speco Boost, Oil pressure and Oil Temp, mounted in din position....
Highflowed CT26E Turbo
Bosch Blow off Valve

Previous setup :
Greddy Profec B @ 12psi
Apexi SAFC II
Standard AFM
RC Engineering 550cc injectors
227rwkw @ 5830rpm

Current setup:
Haltech E11v2 EMS
15psi
Very conservative ignition timing
800cc SARD injectors
3" Straight through lukey muffler
236rwkW @5900rpm, 592Nm @ the engine from 3200-5000 rpm. Flat as

Rolling stock:
Polyurethane bushes
KYB AGX adjustable dampers
7kg/mm coilover springs (Front)
4.7kg/mm custom AJPS springs (Rear)
17x7.5" +0ET BBS deep dish wheels
Front and Rear Whitelight adjustable swaybars
Truetrac 3.9 LSD diff
New and balanced tailshaft
Kelway strut brace

"Ed's" Brake setup:
Front Brakes:
MS65 Front hubs
326mm DBA T3 4000 series rotors
Bendix Ultimate pads
4-piston Alloy Calipers
RA60 Strut tubes for 2deg. Negative camber

Rear Brakes:
MS123 Rear hubs
308mm UZZ30 Soarer rotors
Bendix ultimate pads
2 piston GTR calipers
Custom setup for stock handbrake

Interior:
Swap for Black stripey interior
Momo Course steering wheel with custom celica dragon badge
Custom new gearboot

Exterior:
Colour change to Black
Internal aerial
3.0 turbo badge on grille
3.0i decal on rear of car
Windows tinted dark as legal
Fully engineered and legal

What is left to do:

Well it finally blew the W58, so I am going to puta new one in, lower the boost to 12psi and possibly add a 3.58:1 diff ratio in.

Then the rear camber kit

Then 4x 235/40/17 Direzza Star Spec tyres

Then, hopefully, finished


Here are all my other videos of the car. All of which were done on the racetrack or a private road. I am not a hoon..... .
http://www.youtube.com/view_play_lis...5C1B3CF23E4090

[Lonewolf]

Good choice on the color change

[Jesse]

awesome!!

[MannyO]

Such a clean MK2! I've always liked the 7M-GTE over the 2JZ..there's just something special about that motor that I can't put my finger on. Take good care of her!

[Gixxersixxerman]

Looks good and sounds great.. I've always been a fan of the older supra's

[dori.]

that's sexy man. love it.

but sorry had to LOL at the M series being legendary for blowing headgaskets

[mkiisupra]

Nice, I keep my MkII as a stock/daily driver, wish I had the time to do similar to yours. Mine needs a respray soon, I'm gonna use the Hot Lava color. BTW, your wheels look fantastic!

Eric G

[ST185RC]

Beauty, I had a blue/navy two tone MK2 with a 7M-GTE swap myself. I sure miss her.

[JACK 8URT0N]

Interior and engine bay shots?

[DarkCard]

I love it almost bought one... would love to own was a project, does yours have the hand pumped lumbar support and the wired flashlight? I love the gadgets this car had

[Turbowned]

I love me some MKII Supra! Yours is nice!! Sounds like it's fast and well-sorted, too! I thought about getting one and swapping a 3SGTE into it, but then the twins came out and I stopped wanting to mess with old cars.

[Killerbee]

Love what you've done to the car. Dont like the engine though, hated my MKIII just for the engine that was driving me mad. Well, on the otherside, my MKIII was not well maintained by the preowner, so I guess your engine will be better :-)

The wheels and the color just matches perfectly the 80s badass look. Please look well after her, cars like that should stay on the road forever

[RyleyMA61]

Thanks guys.

Yeah I will dig up some engine bay/interior shots. It's basically just stripey black standard interior - with pneumatic lumbar support pump and all

The idea was a car that looked fairly stock, but performed far from it...

I just need to get this gearbox fixed so I can drive it again!