Kraftwerks Supercharger Owners Thread - Page 158 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

KraftWerks · 10-16-2014, 04:12 PM

Quote:

Originally Posted by projek_01

Thanks to @KraftWerks! Turns out that my car was stalling because the ECU needed to learn/calibrate itself to the new tune. After driving it lightly around town for a bit, it seems to be running smoother than the OEM tune.

Sweet! Glad you were able to figure it out. Now you can enjoy the boost life. =D

post_break · 10-18-2014, 09:58 PM

Painted the custom grill we made.

[ame="https://www.youtube.com/watch?v=0huMlzzP-Vs"]Vlog 20 Custom grill - YouTube[/ame]

Xero-Limit · 10-18-2014, 10:33 PM

Not sure if the owner is on here, but this is a c38 kit with stock fueling, remotely tuned breaking 300 whp on pump gas!

Dyno charts courtesy of Hux Racing in Alabama, hit them up if you are looking for a competent installer.

Dream20b · 10-21-2014, 01:57 PM

Quote:

Originally Posted by moto-mike

Not sure if the owner is on here, but this is a c38 kit with stock fueling, remotely tuned breaking 300 whp on pump gas!

do you know about any additional mods?

N.O.B · 10-22-2014, 04:00 AM

Quote:

Originally Posted by Dream20b

do you know about any additional mods?

I have a full 3 inch Nameless exhaust with Borla headers.

Freeman · 10-22-2014, 09:54 AM

Quote:

Originally Posted by N.O.B

I have a full 3 inch Nameless exhaust with Borla headers.

Are you on 93 octane?

N.O.B · 10-22-2014, 03:15 PM

Quote:

Originally Posted by Freeman

Are you on 93 octane?

Yes

Gixxersixxerman · 10-23-2014, 04:19 AM

Just a update on my car and kit.

So after a few thousand miles running the 70mm SC pulley and the belt having some slap on the lower mount it finally gave out.. I already knew the belt wouldn't last, KW let me know that Gates stated after approving the belt, and testing they came back with not advising using the smaller 70mm pulley. Being a Gates dealer and getting the belts cheap I still went this route. The automatics just need that little more oomph so I wanted a higher boost pressure. I changed the belt and we also did a video on how to change the belt without removing the SC as it seems to be a common myth that this charger has to come off to change belts..

So new belt and all car was running good, it does have some start up issues sometimes, not really sure what it is, but some times it sputters and dies like it's really really rich.. Other times it fires right up. Last week I talked to Joe at KW and he let me know the new pulley kits are out, so I ordered three up.. These are bigger pulleys so not to cause belt problems on the smaller pulley for the high boost setup.. I'm running a 128mm I think and a 85mm instead of the 90mm for even more boost. At 7400 before I was at 12.5 at the ~3k elevation and now I'm at 15.9. We are also going to run up to 8k on the flex fuel running E85.. Finally today my car seemed fast.. I've driven the other 2 kits (C30 and a C38 on high boost) and my car always seemed lacking.. Finally since owning I wished I got the manual.. But the ride home changed all that.. First always spun the tires at the top end, but now second does as well, and it even chirped 2nd.. The car just came alive.. I didn't get on it to much as it's not mapped for the extra couple lbs, but AFR never went above 11.7 so I felt a little safe taking it up until I finally hit redline.. I won't be taking pump gas to 8k as I don't think the engine will handle that.. 15.9lbs. at 7400 so it will be well over 17lbs. at 8k and that's alot to ask of 91 pump..

Just wanted to share my progress, good or bad I don't mind posting up.. Being a dealer for the kit I still don't mind pointing out negatives, but so far the only negative I've had was Church almost/did ruin my motor.. Otherwise no complaints about the kit that I wasn't already warned about..

wahsaihin · 10-26-2014, 11:54 AM

what are you guys running for aftermarket headers and exhausts for your setup? does skunk2 have an offering yet, presumably ideal for the KWSC kit?

Rulin · 10-26-2014, 02:54 PM

I have a Ark GRiP with the catless test pipe and it feels and sounds great. Haven't put the car on the dyno yet, but the power is great so far with the c30-94 kit

Sent from my Nexus 5 using NASIOC mobile app

digital_assassin · 10-27-2014, 03:43 AM

Quote:

Originally Posted by Gixxersixxerman

I changed the belt and we also did a video on how to change the belt without removing the SC as it seems to be a common myth that this charger has to come off to change belts..

This would be good content to add to the first post. Can you please drop a link to the video so I can add it.

Gixxersixxerman · 10-27-2014, 04:43 AM

Quote:

Originally Posted by digital_assassin

This would be good content to add to the first post. Can you please drop a link to the video so I can add it.

Yes.. Video should be ready by the end of the week.. He is doing the editing and all between his job and his YT channel stuff.. I'll post up once it's ready

Freeman · 10-27-2014, 04:06 PM

Quote:

Originally Posted by wahsaihin

what are you guys running for aftermarket headers and exhausts for your setup? does skunk2 have an offering yet, presumably ideal for the KWSC kit?

Their header is coming is what I was told. Don't remember if there was an ETA or not.

My current exhaust set up is:
JDL autodesign UEL
Nameless Performance 3 inch carted and resonated OP/DP
Perrin Performance 3 inch resonated catback

post_break · 10-27-2014, 04:38 PM

Car is running great in this cooler weather. Can't wait for Delicious new revisions and flex fuel tunes to drop.

10-26-2014, 02:54 PM	#2208
Rulin WRX -> BRZ. (TX) Join Date: Jul 2014 Drives: 2015 Series.Blue WRB Location: Carrollton, TX Posts: 101 Thanks: 156 Thanked 55 Times in 34 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	I have a Ark GRiP with the catless test pipe and it feels and sounds great. Haven't put the car on the dyno yet, but the power is great so far with the c30-94 kit Sent from my Nexus 5 using NASIOC mobile app __________________ 2015 Series.Blue WRB KraftWerks c3094 SC Kit ARK GRiP w/ test pipe KW V3 OEM Audio + Reference 400CF

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate (Sprintex) Supercharger Owners Topic	DarrenDriven	Forced Induction	9139	12-29-2023 10:58 PM
Kraftwerks Rotrex Supercharger Discussion	nelsmar	Forced Induction	697	01-18-2022 12:06 PM
All SUPERCHARGER kits compilation thread	subatoy	Forced Induction	76	03-10-2016 12:38 PM
Kraftwerks Supercharger??	umpadupa	Forced Induction	1	08-05-2013 05:27 PM

10-18-2014, 10:33 PM	#2201
Xero-Limit Join Date: Nov 2012 Drives: JDL Turbo FRS, 335SC BRZ (ret) Location: Lehigh Valley, PA Posts: 932 Thanks: 368 Thanked 1,547 Times in 525 Posts Mentioned: 380 Post(s) Tagged: 6 Thread(s)	Not sure if the owner is on here, but this is a c38 kit with stock fueling, remotely tuned breaking 300 whp on pump gas! Dyno charts courtesy of Hux Racing in Alabama, hit them up if you are looking for a competent installer.

10-23-2014, 04:19 AM	#2206
Gixxersixxerman Senior Member Join Date: Aug 2012 Drives: Toyota GT86, 66 beetle, 11 GSXR 750 Location: Las Vegas, NV. Posts: 1,382 Thanks: 575 Thanked 836 Times in 436 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Just a update on my car and kit. So after a few thousand miles running the 70mm SC pulley and the belt having some slap on the lower mount it finally gave out.. I already knew the belt wouldn't last, KW let me know that Gates stated after approving the belt, and testing they came back with not advising using the smaller 70mm pulley. Being a Gates dealer and getting the belts cheap I still went this route. The automatics just need that little more oomph so I wanted a higher boost pressure. I changed the belt and we also did a video on how to change the belt without removing the SC as it seems to be a common myth that this charger has to come off to change belts.. So new belt and all car was running good, it does have some start up issues sometimes, not really sure what it is, but some times it sputters and dies like it's really really rich.. Other times it fires right up. Last week I talked to Joe at KW and he let me know the new pulley kits are out, so I ordered three up.. These are bigger pulleys so not to cause belt problems on the smaller pulley for the high boost setup.. I'm running a 128mm I think and a 85mm instead of the 90mm for even more boost. At 7400 before I was at 12.5 at the ~3k elevation and now I'm at 15.9. We are also going to run up to 8k on the flex fuel running E85.. Finally today my car seemed fast.. I've driven the other 2 kits (C30 and a C38 on high boost) and my car always seemed lacking.. Finally since owning I wished I got the manual.. But the ride home changed all that.. First always spun the tires at the top end, but now second does as well, and it even chirped 2nd.. The car just came alive.. I didn't get on it to much as it's not mapped for the extra couple lbs, but AFR never went above 11.7 so I felt a little safe taking it up until I finally hit redline.. I won't be taking pump gas to 8k as I don't think the engine will handle that.. 15.9lbs. at 7400 so it will be well over 17lbs. at 8k and that's alot to ask of 91 pump.. Just wanted to share my progress, good or bad I don't mind posting up.. Being a dealer for the kit I still don't mind pointing out negatives, but so far the only negative I've had was Church almost/did ruin my motor.. Otherwise no complaints about the kit that I wasn't already warned about..

10-26-2014, 11:54 AM	#2207
wahsaihin Member Join Date: Apr 2013 Drives: 2013 Subaru BRZ Sport-Tech Location: Calgary Posts: 85 Thanks: 17 Thanked 29 Times in 22 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	what are you guys running for aftermarket headers and exhausts for your setup? does skunk2 have an offering yet, presumably ideal for the KWSC kit?

User Name		Remember Me?
Password