OFT - Example alternate maps for AT, 98RON, E85, MAF Scales

[steve99]

Originally Posted by Ondreiko

So don't i need to divide columns (comma separated) prior loading into vgi?
My vgi tool is surely latest.

No vgi tool will pick out columns it wants using headers and ask you to confirm you don't need to manipulate the data just remove the first lines above header but leave headers in file

[Wayno]

Notepad++

[Ondreiko]

Originally Posted by steve99

No vgi tool will pick out columns it wants using headers and ask you to confirm you don't need to manipulate the data just remove the first lines above header but leave headers in file

Now it fitted. Thank you for you guidance. Seems i rescaled MAF for the first time. feels like i am not virgin anymore

[nexusatm]

is the most powerfull rom for NA fa20?

[Wayno]

Originally Posted by nexusatm

is the most powerfull rom for NA fa20?

I don't understand the question.

The most powerful tune will always be custom tune developed on a dyno and track for the specific car.

They're Shiv's tunes. If they by chance make more power on a specific car it's only because the MAF scale is better for said car.

Short answer: No.

[nexusatm]

Originally Posted by Wayno

I don't understand the question.

The most powerful tune will always be custom tune developed on a dyno and track for the specific car.

They're Shiv's tunes. If they by chance make more power on a specific car it's only because the MAF scale is better for said car.

Short answer: No.

sorry for my poor english, i meaned if i take you rom and OFT rom, put it to same gt86, wich rom will be better?

[Wayno]

Originally Posted by nexusatm

sorry for my poor english, i meaned if i take you rom and OFT rom, put it to same gt86, wich rom will be better?

I've developed MAF scales that a slightly leaner in places on MT and much leaner by necessity for AT, which MAY give you more power. I would consider them a better starting point.

There's many other tweaks rolled in that a few people on the forums have developed which could be considered "better".

On my car and cars in my country, they are better, for your car I can make no guarantees.

[nexusatm]

Originally Posted by Wayno

I've developed MAF scales that a slightly leaner in places on MT and much leaner by necessity for AT, which MAY give you more power. I would consider them a better starting point.

There's many other tweaks rolled in that a few people on the forums have developed which could be considered "better".

On my car and cars in my country, they are better, for your car I can make no guarantees.

Thx for answer

[nexusatm]

Another question...
If i will install cusco 4.566 final gear, some corrections in rom needed?

[phrosty]

Originally Posted by nexusatm

Another question...
If i will install cusco 4.566 final gear, some corrections in rom needed?

nope.

[xsnapshot]

I am missing a couple tables in my OFT rom. I'm using the V2.067 map that matches my CALID and the definition that matches the same.

The tables I'm missing are the following:

Engine Load Limiter A (NOTE: TABLE AXIS IS RESCALED, AT AND MT ARE DIFFERENT)
- Engine Load Limiter B (NOTE: TABLE AXIS IS RESCALED, AT AND MT ARE DIFFERENT)

How big of a deal is it that these tables are not here?

EDIT: Apparently I am missing more than just these two. I'm also missing
MAF Correction After Start (In Gear)
- MAF Correction After Start (Neutral)

[Wayno]

It depends what cal code you have, fuel, transmission, etc.

[jupillam]

First of of all thank you for doing this for all of us here in the forums. Any power gain will help little awesome car much more fun to drive. So my question today is that is the file compatible with my CAL ID ZA1JA00D ? Thanks again

[KoolBRZ]

Originally Posted by jupillam

First of of all thank you for doing this for all of us here in the forums. Any power gain will help little awesome car much more fun to drive. So my question today is that is the file compatible with my CAL ID ZA1JA00D ? Thanks again

I also have CAL ID ZA1JA00D. I have already added all wayno's additions to my definitions and tunes. PM me with your email address and I'll send you the definition file and a tune with wayno's additions. Won't take but a few minutes to change back the AVCS and MAF tables to the way wayno had them, and since we both have the same CAL ID, no worries about compatibility.