12v RCA Switch/Toggle? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

MmmDieselFumes · 03-19-2013, 12:09 AM

Howdy yall,

I'm curious if anyone knows of a nice compact RCA switch that'll run off 12v? After playing around with Beatsonic's backup camera, I got to thinking about what other kinds of things I could do with RCA inputs on the stock HU.

What I'm envisioning is wiring it to where when I put it in reverse, it'll still kick the reverse mode on, but I'd also wire in a switch to apply voltage to the terminal (pin 2 I believe?) on demand (to turn on the "RCA-on mode"), and a switch to change inputs from the backup camera to whatever other RCA input I eventually run (MHL to RCA to display the phone's screen on deck for navigation or whatnot maybe?).

Thoughts?

MmmDieselFumes · 03-19-2013, 01:02 AM

Something like this maybe. And I didn't draw it in, but I'm pretty sure I'd need a dpdt relay between the reverse signal and 12v acc toggle wire to keep signal bleed from tricking the car into thinking it's in reverse while being driven.

Sent from my EVO using Tapatalk 2

SloS13 · 03-19-2013, 07:38 AM

If you figure it out, make a kit, small production run, profit.

MmmDieselFumes · 03-19-2013, 09:45 AM

That'd be easy enough if people were actually interested. I mean you could use it as a switch for whatever kind of signal you wanted (DVD player, game console, phone, etc).

Wonder what a good two button toggle switch would look like, and where would be best to mount it. Where the seat heater buttons are supposed to be?

Sent from my Nexus 7 using Tapatalk 2

MmmDieselFumes · 03-19-2013, 10:43 PM

Well, I got the wiring figured out. No fancy switcher needed. Basically, you'll have two switches. One to switch from Auto (the screen will come on when shifting into reverse), and Manual-Override to turn on screen on On-Demand. Another switch to go from RCA Input 1 to 2.

Parts:
3x 12v DPDT relays (w/ diode to prevent voltage spike)
1x SPST Toggle Switch
1x SPDT Toggle Switch
3x Molex-Style Pins
18x Spade-End Connectors
2x Ring Connectors
2x Posi-Taps
1x Spool of Wire.

Any input or thoughts if I drew the wiring diagram wrong?

UbSaMrC · 04-29-2013, 09:22 PM

Or try this for your composite switcher...
[ame="http://www.amazon.com/Intelligent-Video-Switcher-Output-Camera/dp/B00B155G5M"]Amazon.com: Intelligent Car Video Switcher 3-way Input 1-way Output for the Car Camera: Electronics[/ame]

chadstyle · 04-29-2013, 09:55 PM

I've made plenty with standard 5 pin relays... I don't think you need dpdt relays at all.

UbSaMrC · 05-07-2013, 02:29 PM

It looks like we might have an easier solution.
Name: uploadfromtaptalk1367951328904.jpg
Views: 3602
Size: 49.0 KB

Name: uploadfromtaptalk1367951345056.jpg
Views: 3520
Size: 51.8 KB

Name: uploadfromtaptalk1367951369967.jpg
Views: 3559
Size: 55.8 KB

Sent from my SPH-D710 using Tapatalk 2

Acid86 · 08-02-2013, 02:22 AM

Quote:

Originally Posted by UbSaMrC

It looks like we might have an easier solution.
Attachment 36449
Attachment 36450
Attachment 36451
Sent from my SPH-D710 using Tapatalk 2

How. Please. How.

Or in non mongol speak,

Could you please elaborate on the steps you took to get to this option?

Thank you.

l0aded · 08-02-2013, 03:02 AM

Quote:

Originally Posted by Acid86

How. Please. How.

Or in non mongol speak,

Could you please elaborate on the steps you took to get to this option?

Thank you.

The USA version (says Zypr powered) does not support this ability. The end.

Acid86 · 08-02-2013, 10:09 PM

F***.

lbroskee · 08-02-2013, 11:49 PM

however the other method with switches will do the trick. just have to deal with the "check for safety" message at all times in video

lbroskee · 08-04-2013, 06:31 PM

Quote:

Originally Posted by chadstyle

I've made plenty with standard 5 pin relays... I don't think you need dpdt relays at all.

i tried this and it ended up where reverse or not the switch has total control when grounded. when not grounded it works regularly and switch does nothing. any ideas or how to do it on a 5 pin?

chadstyle · 08-04-2013, 06:40 PM

Quote:

Originally Posted by lbroskee

i tried this and it ended up where reverse or not the switch has total control when grounded. when not grounded it works regularly and switch does nothing. any ideas or how to do it on a 5 pin?

Sounds like you have it wired up wrong..without seeing it I honestly can't tell you where you made the mistake

03-19-2013, 12:09 AM	#1
MmmDieselFumes Senior Member Join Date: Jul 2012 Drives: . Location: . Posts: 333 Thanks: 176 Thanked 118 Times in 80 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	12v RCA Switch/Toggle for Backup Camera on Stock HU? Howdy yall, I'm curious if anyone knows of a nice compact RCA switch that'll run off 12v? After playing around with Beatsonic's backup camera, I got to thinking about what other kinds of things I could do with RCA inputs on the stock HU. What I'm envisioning is wiring it to where when I put it in reverse, it'll still kick the reverse mode on, but I'd also wire in a switch to apply voltage to the terminal (pin 2 I believe?) on demand (to turn on the "RCA-on mode"), and a switch to change inputs from the backup camera to whatever other RCA input I eventually run (MHL to RCA to display the phone's screen on deck for navigation or whatnot maybe?). Thoughts? Last edited by MmmDieselFumes; 03-19-2013 at 10:51 PM.

03-19-2013, 01:02 AM	#2
MmmDieselFumes Senior Member Join Date: Jul 2012 Drives: . Location: . Posts: 333 Thanks: 176 Thanked 118 Times in 80 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Something like this maybe. And I didn't draw it in, but I'm pretty sure I'd need a dpdt relay between the reverse signal and 12v acc toggle wire to keep signal bleed from tricking the car into thinking it's in reverse while being driven. Sent from my EVO using Tapatalk 2 Attached Images Last edited by MmmDieselFumes; 03-19-2013 at 01:16 AM.

03-19-2013, 10:43 PM	#5
MmmDieselFumes Senior Member Join Date: Jul 2012 Drives: . Location: . Posts: 333 Thanks: 176 Thanked 118 Times in 80 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Well, I got the wiring figured out. No fancy switcher needed. Basically, you'll have two switches. One to switch from Auto (the screen will come on when shifting into reverse), and Manual-Override to turn on screen on On-Demand. Another switch to go from RCA Input 1 to 2. Parts: 3x 12v DPDT relays (w/ diode to prevent voltage spike) 1x SPST Toggle Switch 1x SPDT Toggle Switch 3x Molex-Style Pins 18x Spade-End Connectors 2x Ring Connectors 2x Posi-Taps 1x Spool of Wire. Any input or thoughts if I drew the wiring diagram wrong? Attached Images

04-29-2013, 09:55 PM	#7
chadstyle Senior Member Join Date: Oct 2012 Drives: 2013 Subaru BR-Z Limited Location: Fort Lauderdale, Florida Posts: 883 Thanks: 407 Thanked 562 Times in 294 Posts Mentioned: 42 Post(s) Tagged: 4 Thread(s)	I've made plenty with standard 5 pin relays... I don't think you need dpdt relays at all. __________________ ChadStyle's Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
So where will the fog light switch go...	Asphalt	Scion FR-S / Toyota 86 GT86 General Forum	19	04-08-2019 07:09 PM
Brake switch adjustment ?	photomike	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	6	02-20-2013 01:49 AM
Switch Back LEDs for BRZ	DNAPoPo	Cosmetic Modification (Interior/Exterior/Lighting)	1	02-07-2013 08:11 PM
86 centre switch cover	Ryan86	AFRICA	47	12-06-2012 12:23 PM
Anyone going to switch badges?	DougieFresh	Scion FR-S / Toyota 86 GT86 General Forum	60	09-28-2011 02:56 AM

03-19-2013, 07:38 AM	#3
SloS13 Senior Member Join Date: Feb 2013 Drives: 2013 FR-S whiteout Location: Columbia, SC Posts: 157 Thanks: 65 Thanked 165 Times in 59 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	If you figure it out, make a kit, small production run, profit.

03-19-2013, 09:45 AM	#4
MmmDieselFumes Senior Member Join Date: Jul 2012 Drives: . Location: . Posts: 333 Thanks: 176 Thanked 118 Times in 80 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	That'd be easy enough if people were actually interested. I mean you could use it as a switch for whatever kind of signal you wanted (DVD player, game console, phone, etc). Wonder what a good two button toggle switch would look like, and where would be best to mount it. Where the seat heater buttons are supposed to be? Sent from my Nexus 7 using Tapatalk 2

08-02-2013, 10:09 PM	#11
Acid86 Junior Member Join Date: Jun 2013 Drives: 2013 Raven Scion Fr-s Location: Athens, Georgia Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	F***.

User Name		Remember Me?
Password