OFFICIAL Torque Android app PID/Misc Thread - Page 53 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ck-GT86 · 10-22-2015, 11:14 PM

Quote:

Originally Posted by ck-GT86

I'll share my settings once I get my hands on my tablet, will be a few hours

Sent from my iPhone using Tapatalk

My settings: practically the same as yours

PID: 2101
Short name: oil temp custom
Min: -40.0
Max: 215
Scale: x1
Unit type: C
Equation: AC-40
OBD header: Auto

Sent from my iPhone using Tapatalk

Alltezza · 10-26-2015, 11:45 AM

Just ordered my bluetooth OB2

[ame="http://www.amazon.com/ScanTool-427201-OBDLink-Bluetooth-Diagnostic/dp/B00H9S71LW/ref=sr_1_5?ie=UTF8&qid=1445874323&sr=8-5&keywords=OB2+bluetooth"]Amazon.com: ScanTool 427201 OBDLink LX Bluetooth: OBD Adapter/Diagnostic Scanner for Android & Windows: Automotive[/ame]

Can't wait to try this out

zoth · 10-26-2015, 12:46 PM

Quote:

Originally Posted by Alltezza

Just ordered my bluetooth OB2

Amazon.com: ScanTool 427201 OBDLink LX Bluetooth: OBD Adapter/Diagnostic Scanner for Android & Windows: Automotive

Can't wait to try this out

That's what I use, never fails.

Sent from my XT1575 using Tapatalk

jaorocks1 · 10-26-2015, 04:54 PM

what's a stock FRS/BRZ dyno on this virtual dyno?

Alltezza · 10-28-2015, 03:12 PM

God damnit so I got excited and hook up the 427201 OBDLink LX Bluetooth and I added the oil temp thing on the Torque app and now I have a CEL code. Anyone know how to fix this? It said something about a damn network or something

BigFatFlip · 10-28-2015, 03:15 PM

Quote:

Originally Posted by Alltezza

God damnit so I got excited and hook up the 427201 OBDLink LX Bluetooth and I added the oil temp thing on the Torque app and now I have a CEL code. Anyone know how to fix this? It said something about a damn network or something

Need more info, maybe post up the code you came up with? In some instances, a CEL can come up if the OBD2 adapter was pulled out before turning the car off.

Alltezza · 10-28-2015, 03:22 PM

Quote:

Originally Posted by BigFatFlip

Need more info, maybe post up the code you came up with? In some instances, a CEL can come up if the OBD2 adapter was pulled out before turning the car off.

Yeah I just went outside because my dumbass forgot to write the code down. Because I freaked out.

CEL Code - U0073

Edit: So after calming down I found this.

http://www.ft86club.com/forums/showthread.php?t=42174

Hopefully that's all there is to it. If you're reading this maybe you can provide more feedback too.

BigFatFlip · 10-28-2015, 03:29 PM

Quote:

Originally Posted by Alltezza

Yeah I just went outside because my dumbass forgot to write the code down. Because I freaked out.

CEL Code - U0073

Edit: So after calming down I found this.

http://www.ft86club.com/forums/showthread.php?t=42174

Hopefully that's all there is to it. If you're reading this maybe you can provide more feedback too.

Yep, same thing happened to me. Clear the code and you're good to go!

Alltezza · 10-29-2015, 02:40 AM

Alright so after driving around basically for the majority of the way I was I decided to see how accurate the Torque and HP gauges were.

So I noticed immediately with the Torque display that I should NOT be in the 200 ft/lb range at all even if it's reading to the crank i don't think I should be at that level. I didn't pay much attention to my HP except that I noticed the highest I got was ~210-220 I don't know if that's right either I'd believe it if it was to the crank (I am tuned with UEL headers)

Just thought I'd ask you guys and if there's a way for it to read a little more accurately.

jaorocks1 · 10-29-2015, 10:30 PM

Quote:

Originally Posted by Alltezza

Alright so after driving around basically for the majority of the way I was I decided to see how accurate the Torque and HP gauges were.

So I noticed immediately with the Torque display that I should NOT be in the 200 ft/lb range at all even if it's reading to the crank i don't think I should be at that level. I didn't pay much attention to my HP except that I noticed the highest I got was ~210-220 I don't know if that's right either I'd believe it if it was to the crank (I am tuned with UEL headers)

Just thought I'd ask you guys and if there's a way for it to read a little more accurately.

I have basically the same question

choyr · 12-21-2015, 03:45 AM

anyone managed to get PIDs for gear indicator for manual if possible? I was looking for default PIDs in torque pro but no gear/transmission.

LS1M · 03-04-2016, 12:49 PM

[searched but couldn't find anything so I'll ask here; sorry if it's been covered already]

Has anyone been able to get the flex fuel ethanol content to read on Torque? I have the Delicious flex fuel kit plugged into the rear O2 sensor harness. Supposed to be "rear o2 voltage times 20" but I can't get it to work.

Thanks!
-Mark

xsnapshot · 05-04-2016, 11:09 AM

Has anyone found a way to monitor knock or IAM via torque or any other OBDII reader app?

I have Ecutek, but it would be nice to just be able to plug up my phone and monitor that way.

Nightbringer · 05-21-2016, 04:19 PM

I'm also very interested in getting IAM or knock retard via torque. Was really hoping someone would have provided the PID info after all these years.

KR is one of those critical things I'd like to see without carting the laptop everywhere.

10-26-2015, 04:54 PM	#732
jaorocks1 Senior Member Join Date: Jun 2014 Drives: 92 Prelude Location: San Diego Posts: 267 Thanks: 8 Thanked 60 Times in 33 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	what's a stock FRS/BRZ dyno on this virtual dyno? __________________ Www.PublicMvmnt.bigcartel.com My FRS Review: http://www.ft86club.com/forums/showthread.php?t=71746 My FRS build: http://www.ft86club.com/forums/showt...02#post2115402

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torque app for android question	Brody602	Electronics \| Audio \| NAV \| Infotainment	8	01-08-2015 04:53 PM
Torque for Android	Freeman	Scion FR-S / Toyota 86 GT86 General Forum	7	11-22-2012 11:05 PM
Android Torque app questions	Craig	Engine, Exhaust, Transmission	1	11-12-2012 04:14 PM
Bluetooth OBD scanner and Android Torque - less than 25 shipped	whataboutbob	Engine, Exhaust, Transmission	7	10-20-2012 01:15 PM
Android Tablet + torque	CharlieChaos	Electronics \| Audio \| NAV \| Infotainment	3	10-04-2012 08:23 PM

10-26-2015, 11:45 AM	#730
Alltezza Senior Member Join Date: Mar 2014 Drives: WRB Limited BRZ Location: Tennessee Posts: 696 Thanks: 450 Thanked 276 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Just ordered my bluetooth OB2 [ame="http://www.amazon.com/ScanTool-427201-OBDLink-Bluetooth-Diagnostic/dp/B00H9S71LW/ref=sr_1_5?ie=UTF8&qid=1445874323&sr=8-5&keywords=OB2+bluetooth"]Amazon.com: ScanTool 427201 OBDLink LX Bluetooth: OBD Adapter/Diagnostic Scanner for Android & Windows: Automotive[/ame] Can't wait to try this out

10-28-2015, 03:12 PM	#733
Alltezza Senior Member Join Date: Mar 2014 Drives: WRB Limited BRZ Location: Tennessee Posts: 696 Thanks: 450 Thanked 276 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	God damnit so I got excited and hook up the 427201 OBDLink LX Bluetooth and I added the oil temp thing on the Torque app and now I have a CEL code. Anyone know how to fix this? It said something about a damn network or something

10-29-2015, 02:40 AM	#737
Alltezza Senior Member Join Date: Mar 2014 Drives: WRB Limited BRZ Location: Tennessee Posts: 696 Thanks: 450 Thanked 276 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Alright so after driving around basically for the majority of the way I was I decided to see how accurate the Torque and HP gauges were. So I noticed immediately with the Torque display that I should NOT be in the 200 ft/lb range at all even if it's reading to the crank i don't think I should be at that level. I didn't pay much attention to my HP except that I noticed the highest I got was ~210-220 I don't know if that's right either I'd believe it if it was to the crank (I am tuned with UEL headers) Just thought I'd ask you guys and if there's a way for it to read a little more accurately.

12-21-2015, 03:45 AM	#739
choyr Junior Member Join Date: Feb 2013 Drives: Toyota 86 Location: Abu Dhabi UAE Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	anyone managed to get PIDs for gear indicator for manual if possible? I was looking for default PIDs in torque pro but no gear/transmission.

03-04-2016, 12:49 PM	#740
LS1M Senior Member Join Date: Mar 2015 Drives: 2015 BRZ Location: Texas Posts: 100 Thanks: 18 Thanked 37 Times in 27 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	[searched but couldn't find anything so I'll ask here; sorry if it's been covered already] Has anyone been able to get the flex fuel ethanol content to read on Torque? I have the Delicious flex fuel kit plugged into the rear O2 sensor harness. Supposed to be "rear o2 voltage times 20" but I can't get it to work. Thanks! -Mark

05-04-2016, 11:09 AM	#741
xsnapshot Fast enough Join Date: Jun 2013 Drives: 2013 Subaru BRZ AT Location: nashville Posts: 175 Thanks: 11 Thanked 56 Times in 38 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	Has anyone found a way to monitor knock or IAM via torque or any other OBDII reader app? I have Ecutek, but it would be nice to just be able to plug up my phone and monitor that way.

05-21-2016, 04:19 PM	#742
Nightbringer Senior Member Join Date: Apr 2013 Drives: Scion FR-S Location: Nowhere Posts: 346 Thanks: 175 Thanked 211 Times in 120 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I'm also very interested in getting IAM or knock retard via torque. Was really hoping someone would have provided the PID info after all these years. KR is one of those critical things I'd like to see without carting the laptop everywhere.

User Name		Remember Me?
Password