PTUNING 4-1 Full T304 SS Equal Length Double-Slip Race Header (200+whp 93 pump gas)

[kosoku]

Order placed!

[juliog]

Today we had 21 twins show up to dyno day at Church Automotive Testing with Jackson Racing in Long Beach CA:
http://www.ft86club.com/forums/showt...t=93180&page=3

I posted my dyno on the dyno day thread, hope more people post theirs. I came in late (#20 of #21), but I think I made the most peak power on 91 N/A. A couple N/A cars made 204-205 on E85, I believe.

No cars with the ACE header today unfortunately.



91 pump gas
** Ptuning EL header **
Tomei over pipe
Tomei front pipe
OEM catback
Garage Vary intake duct
Jackson Racing Oil Cooler

[phobos512]

Originally Posted by juliog

Today we had 21 twins show up to dyno day at Church Automotive Testing with Jackson Racing in Long Beach CA:

http://www.ft86club.com/forums/showt...t=93180&page=3



I posted my dyno on the dyno day thread, hope more people post theirs. I came in late (#20 of #21), but I think I made the most peak power on 91 N/A. A couple N/A cars made 204-205 on E85, I believe.



No cars with the ACE header today unfortunately.



91 pump gas

** Ptuning EL header **

Tomei over pipe

Tomei front pipe

OEM catback

Garage Vary intake duct

Jackson Racing Oil Cooler

juliog, what kind of tuning are you running? You didn't mention it. Thanks for posting your dyno!

[juliog]

I'm tuned with ECUTek by the same shop running the dyno day.

[Doug@PTUNING]

Bump!

[G-Man]

Here is my result from a dyno day with shiv. OFT EL 93 tune vs custom tune when he came into town.



Same day a car with the ACE came in

[Trefoil]

Does anyone have any results on e85?

[kosoku]

@ptuning I will be finally installing the header tomorrow and will be tuning it here in early November. Could you please send your "tune sheet" to give to the tuner?

[civicdrivr]

Originally Posted by Trefoil

Does anyone have any results on e85?

I've been running the Delicious flex fuel kit with this header for a few months. I really need to get it on the dyno, but I can definitely feel a big difference from 4k to redline.

I'll try to hit up the dyno in a few weeks.

Sent from my XT1095 using Tapatalk

[Ken@PTuning]

Originally Posted by kosoku

@ptuning I will be finally installing the header tomorrow and will be tuning it here in early November. Could you please send your "tune sheet" to give to the tuner?

You have a PM.

[kosoku]

Originally Posted by Ken@PTuning

You have a PM.

thanks Ken! I'll put it to good use and post some results.

I will say in 15 years of being into "modding" cars this was the first time I could feel a difference after doing a basic bolt on. The vehicle seems more responsive as far as acceleration. I'm actually planning on driving my buddies car tomorrow to compare.

Before it was more of a "I think I feel a difference".

[Ken@PTuning]

I'm glad you like it! Just wait until you have it tuned!

We're currently running a special on the headers for a limited time if anyone is interested. Please see the below link.

http://www.ptuning.com/subdir/partno...=PTP-EXH-15100

[kosoku]

finally got mine "tuned". Not quite the experience and results I was hoping for.

With that said the car feels great & sounds great!

See my build/journal below

[Mrc@ptuning]

Originally Posted by kosoku

finally got mine "tuned". Not quite the experience and results I was hoping for.

With that said the car feels great & sounds great!

See my build/journal below

We're glad you like the header. If you want to extract the most from your setup and willing to make the trip to northern VA, we suggest you schedule a tune with our tuner Toan.


MrC