ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[Yruyur]

Possibly use one of these. Only 99 bucks. 900+ cfm with a 4 inch inlet.

http://m.harborfreight.com/garage-sh...tor-94029.html

If more cfm 1500+ is needed the one on 35th and Bethany home had one of these in their clearance section for 125 I think

http://m.harborfreight.com/garage-sh...tor-97869.html

Sent from my SCH-I545 using Tapatalk 2

[nelsmar]

Originally Posted by Yruyur

Possibly use one of these. Only 99 bucks. 900+ cfm with a 4 inch inlet.

http://m.harborfreight.com/garage-sh...tor-94029.html

If more cfm 1500+ is needed the one on 35th and Bethany home had one of these in their clearance section for 125 I think

http://m.harborfreight.com/garage-sh...tor-97869.html

Sent from my SCH-I545 using Tapatalk 2

LOL !!! Thanks! We only need ~ 300-400CFM-ish max. Something that has a "power level" adjustment would be fantastic. What is harbor freights return policy? @Ninjin we need a second maf! I'll build an Arduino setup so we can "set" CFM! LOL

[Yruyur]

Just get one of these variable speed controllers for 20 bucks. They work good.

http://m.harborfreight.com/router-sp...not%20provided


Sent from my SCH-I545 using Tapatalk 2

[Yruyur]

Originally Posted by Cross

I know what Jack bought his cable for bad using tapatalk I found another thread that it was sold already for the same price. Are you saying 100 less than those :p I will take if for that price.

http://www.ft86club.com/forums/showthread.php?t=48491


Sent from Spaceball 1

That's a little low. I'll match the 225 though.

Sent from my SCH-I545 using Tapatalk 2

[Cross]

Originally Posted by Yruyur

That's a little low. I'll match the 225 though.

Sent from my SCH-I545 using Tapatalk 2

@nelsmar We need to chat lol. @Yruyur I believe Jack and I are finally making it to the Pav's this weekend would that work for you?

[nelsmar]

Originally Posted by Cross

@nelsmar We need to chat lol. @Yruyur I believe Jack and I are finally making it to the Pav's this weekend would that work for you?

You know how to get ahold of me. We can talk this afternoon/evening! Get that cable! If no one buys it by Friday im going to take it for a spare! lol

[Yruyur]

Yeah that will work. Still waiting for a stock file to flash back to then I'll be done with the cable. I'll PM you my paypal info.

Sent from my SCH-I545 using Tapatalk 2

[nelsmar]

Originally Posted by Yruyur

Yeah that will work. Still waiting for a stock file to flash back to then I'll be done with the cable. I'll PM you my paypal info.

Sent from my SCH-I545 using Tapatalk 2

I'll email you a stock file right now, which ECU A01C? You should have just asked me

[Yruyur]

Sweet. Ill check. Do you remember the command that you add to the filename that wipes the license from the ecu?



Sent from my SCH-I545 using Tapatalk 2

[nelsmar]

Originally Posted by Yruyur

Sweet. Ill check. Do you remember the command that you add to the filename that wipes the license from the ecu?



Sent from my SCH-I545 using Tapatalk 2

I didn't know there was one! hit up JC and ask? And then tell me! Did you manage to transfer the license?

[Cross]

Sounds good to me!

[Yruyur]

Originally Posted by nelsmar

I didn't know there was one! hit up JC and ask? And then tell me! Did you manage to transfer the license?

Yeah I'll find out. I had to use it on the gtr i flashed for jv and my last car. I needed to send the flash log to jv so he could verify it was removed before he added one to my new ecu.


Sent from my SCH-I545 using Tapatalk 2

[Pscylo]

Anyone have recommendation on dealerships other than Big2 for service? Second time ive been in and had the same noise blamed on separate after market parts that weren't both on the car at the same time in either settings...that existed before either were installed, as well as the rattle in 3rd/4th that there is a TSB for that is intermittent.

Was also told that there isn't anything newer than the 2012 TSB for the fuel pump noise, even though we know there is, even if it is only a sound blanket style wrap for the pump to at least dampen the noise.

[nelsmar]

Originally Posted by Pscylo

Anyone have recommendation on dealerships other than Big2 for service? Second time ive been in and had the same noise blamed on separate after market parts that weren't both on the car at the same time in either settings...that existed before either were installed, as well as the rattle in 3rd/4th that there is a TSB for that is intermittent.

Was also told that there isn't anything newer than the 2012 TSB for the fuel pump noise, even though we know there is, even if it is only a sound blanket style wrap for the pump to at least dampen the noise.

Camelback is good about it.