Joying Android 4.4.4 Kitkat Toyota Head Unit - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

j_motion · 09-15-2015, 01:29 AM

Quote:

Originally Posted by DJCarbine

I did end up having to shave about 2mm from the bezel where it was contacting the android unit. The bezel would snap on, but look pushed out slightly

Ya ..im glad i didnt try to force it in.

Thx for the guide for the repin for the front door speaker.

I have the OEM Kicker sub, was worrying if the sub harness change some configuration.

But after re pin it work out pretty well. no problem at all.

BTY did you get the OBD2 BT reader with your headunit?

Thx

calmtigers · 09-15-2015, 02:46 AM

Pics installed? Considering this as an upgrade

Sent from my iPhone using Tapatalk

DJCarbine · 09-15-2015, 08:45 AM

Quote:

Originally Posted by j_motion

BTY did you get the OBD2 BT reader with your headunit?

Thx

I did not, but it looks like it's easy to get one that works for less than 20 bucks or so

j_motion · 09-15-2015, 02:30 PM

Quote:

Originally Posted by calmtigers

Pics installed? Considering this as an upgrade

Sent from my iPhone using Tapatalk

I will Rip it apart tonight and take some pictures..

Just did the basic install for to test out FM, GPS, to check if they work or not.

Haven't go the time to install the reverse camera yet.
Going to route the Mic to the OEM mike location.

Purchased this to Retain OEM USB harness to USB connection on the aftermarket HU. Not going to bother with the OEM 3.5mm Jack, will never use it anyways.

http://www.aliexpress.com/item/USB-c...1_5_4,201409_2

DJcarbine.

I got the OBD2 form Joying, It pair and connects to the headunit and Torque app. But it doesn't show any real time data after.
And it throws a lot of U0073 code when it is communicating with the cars ECU and sifting through AUTO detect mode to find a Protocol that would work. Not sure if adaptor problem, so i got a couple more to try it out.

Jason

rhood168 · 09-16-2015, 08:39 PM

I wonder if this will work with OEMAudio+ setup.

j_motion · 09-16-2015, 10:49 PM

Sorry i got a little held up, havnet got the time to take the pictures yet.

Quote:

Originally Posted by rhood168

I wonder if this will work with OEMAudio+ setup.

Im not sure if it will work with OEM audio.
If the harness config for OEM Audio is the the same as OEM , i dont see why now.

Right now my connection is like this.

OEM harness - kicker sub harness (plug & play) - Joying harness (Plug & play)
Just need to repin the connect on #9. - Android head unit.

HAWAIICALIVEGAZ · 09-17-2015, 03:07 AM

Looks pretty good!

privfaith · 09-23-2015, 08:53 AM

Anyone noticing the resolution on this thing is.. strange? I find a lot of the apps don't seem to fit correctly.

It's almost as if the sight impaired mode is on.

DJCarbine · 09-23-2015, 09:21 AM

Quote:

Originally Posted by rhood168

I wonder if this will work with OEMAudio+ setup.

I'm using this with the OEMAudio reference 400cf

rhood168 · 09-24-2015, 06:21 PM

Quote:

Originally Posted by DJCarbine

I'm using this with the OEMAudio reference 400cf

Awesome what kind of harness did you use and what settings on the 400 cf? I'm using a pioneer radio atm and its great but I'm looking for something better.

DJCarbine · 09-24-2015, 07:29 PM

Quote:

Originally Posted by rhood168

Awesome what kind of harness did you use and what settings on the 400 cf? I'm using a pioneer radio atm and its great but I'm looking for something better.

I told the guys at OEM Audio+ the headunit I was using, they took care of the DSP settings etc.

The harness is a standard toyota harness, basically just get a radio harness made for the FRS, and wire it into the android HU harness like any other install.

Plug and play

joop1987 · 10-12-2015, 10:26 PM

I installed one of these last weekend and so far I like it a lot. Shipping was fast and install was pretty simple. I had to grind the nipples off the original brackets and move the amp wire from pin 8 to 9. If you have a BRZ, you need to connect both pins. The unit comes with the Toyota harness for power, speakers, .... But you will need the antenna adapter cable (Metra 40-LX11) and USB adapter cable(Metra AX-TOYUSB).

duke_FRS · 10-16-2015, 09:31 PM

How does everyone like the unit? I've found it on amazon. Is it really worth it?

Binary_fission · 10-16-2015, 09:33 PM

Would like to know as well, I'm debating between this and ca-fi but i heard new cafi doesn't support obd2

Sent from my SM-N910T using Tapatalk

09-15-2015, 02:46 AM	#16
calmtigers Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout TRD FR-S 6MT Location: Fresno / DTLA Posts: 928 Thanks: 628 Thanked 376 Times in 214 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Pics installed? Considering this as an upgrade Sent from my iPhone using Tapatalk __________________ "I love dinosaurs so much that I’ve based my life on burning as much black melted dinosaur flesh as I can on a daily basis...even the screaming sound of prehistoric reptilians being burnt through any of the classic Japanese four cylinders gives me great joy."

09-17-2015, 03:07 AM	#21
HAWAIICALIVEGAZ Senior Member Join Date: Aug 2014 Drives: HONDA, TOYOTA Location: PHOENIX AZ Posts: 512 Thanks: 127 Thanked 93 Times in 70 Posts Mentioned: 15 Post(s) Tagged: 1 Thread(s)	Looks pretty good! __________________ New build threadhttp://<a href="http://www.ft86club....p?t=100921</a> Kini will be deleted #KINI86 build thread @HAWAIICALIVEGAZ

10-12-2015, 10:26 PM	#26
joop1987 Senior Member Join Date: Nov 2012 Drives: 2013 FRS, Raven, Auto Location: Hamilton, NJ Posts: 104 Thanks: 0 Thanked 36 Times in 21 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I installed one of these last weekend and so far I like it a lot. Shipping was fast and install was pretty simple. I had to grind the nipples off the original brackets and move the amp wire from pin 8 to 9. If you have a BRZ, you need to connect both pins. The unit comes with the Toyota harness for power, speakers, .... But you will need the antenna adapter cable (Metra 40-LX11) and USB adapter cable(Metra AX-TOYUSB). Attached Images Last edited by joop1987; 10-12-2015 at 10:56 PM.

10-16-2015, 09:31 PM	#27
duke_FRS Member Join Date: Mar 2015 Drives: 2015 FRS Hot Lava 2014 CT200H Location: Miami, Florida Posts: 54 Thanks: 5 Thanked 19 Times in 12 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	How does everyone like the unit? I've found it on amazon. Is it really worth it? __________________ Open Flash Tablet Stage 1 93 \| Borla Cat-Back \| VOSSEN VFS1 \| Eibach Sportline

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another Android Head Unit	Starscream15	Electronics \| Audio \| NAV \| Infotainment	57	08-23-2015 12:41 AM
Dashlinq4 Android Head unit. Stock BRZ fitment. Toyota Universal.	junglizste	Audio/Visual, Electronics, Infotainment, NAV	3	01-08-2015 11:55 AM
Ca-Fi Dashlinq4 Android head unit universal Toyota	phanguy	Audio/Visual, Electronics, Infotainment, NAV	4	11-19-2014 11:57 AM
FS: T7019A Android Head Unit	pheoxs	Audio/Visual, Electronics, Infotainment, NAV	4	08-26-2013 05:05 PM
Android head unit	drei	Electronics \| Audio \| NAV \| Infotainment	21	07-16-2012 02:42 AM

09-16-2015, 08:39 PM	#19
rhood168 Senior Member Join Date: Oct 2012 Drives: Black Subaru Brz Limited Location: NJ Posts: 116 Thanks: 29 Thanked 41 Times in 21 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	I wonder if this will work with OEMAudio+ setup.

09-23-2015, 08:53 AM	#22
privfaith Member Join Date: Aug 2012 Drives: RX8 -> 2013 FRS Location: Long Island - New York Posts: 63 Thanks: 6 Thanked 7 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Anyone noticing the resolution on this thing is.. strange? I find a lot of the apps don't seem to fit correctly. It's almost as if the sight impaired mode is on.

User Name		Remember Me?
Password