NW Marketplace v1.0 (CLOSED)

[Neziah]

A few spares left over for local PDX pick up.

$25 - Grimm Speed License plate kit - used for about 3 weeks. Just decided to run without a front plate. GRIMM

SOLD - 3 QTs Pentosin transmission oil - OIL

Stock Axleback free if anyone wants it, going to scrap if no takers

[Neziah]

Originally Posted by stockysnail

I'll take the oil and I think Kohei @BRZPDX may want the license plate mount.

Oil is all yours, PM me and we can hook up sometime and get it to ya.

[Kmurph]

Hey I have a set of 4 (FOUR) OEM wheel's and tires. I can include the lug nuts if you need them. Tires have close to 6,000 miles on them. Asking $500, cash only please.

[Wonderbar]

So I'm gonna make a post here and see if it flies. This is a last call to order one of my rear diffusers for the FRs/BrZ, it fits the stock bumper, will fit any center fed exhaust (ill edit it to fit a side fed exhaust, no issues.)

The part is made from 5052 aluminum, it will be laser cut, machine formed, machine welded. This sale is for a bare aluminum part, I have powder coat worked out for an extra cost. It encloses the entire bottom of the rear bumper, mounts super easy using the lower bolts on the rear sway and factory holes on the bumper, with the exception of two small self taps on the bottom ends of the bumper cover. It's very non-invasive and no one would know it was ever there once removed.

Price is $450, I will personally deliver and install it. Need half for deposit within the next 48 hours. It will be 3-4 weeks for completion. Includes all screws and nuts with silver skunk2 dress up washers for mounting.

[NickFRS]

Selling my Perrin Light weight crank pulley. Going back to stock. 110 bucks takes it. We can schedule a day at PREracing so they can take it off my car and put it on yours. Perrin Performance has looked at it and said it looks 100% normal. PRE is going to charge me a hour labor to swap back to stock. So I'm assuming it would be an hour for you also. Maybe @PERRIN_Mladen can give us a discount for the swap!

p.s it's black

[PoWn3d_0704]

Anyone Selling a BRZ Limited? Looking to stay away from the dealers, as I'm going to void the hell out of my warranty anyways. Unless that sounds stupid on this car? I'm really not sure.

[Wonderbar]

Originally Posted by PoWn3d_0704

Anyone Selling a BRZ Limited? Looking to stay away from the dealers, as I'm going to void the hell out of my warranty anyways. Unless that sounds stupid on this car? I'm really not sure.

Ill kick you my supercharged and decked out SWP for $38,000

[PoWn3d_0704]

Originally Posted by Wonderbar

Ill kick you my supercharged and decked out SWP for $38,000

That's almost worth it. But alas, I guess you all are right. I want to do the work myself....

Perrin 2.5" header back
Headers (probably catted, haven't decided on one yet. Leaning towards Equal Length... input appreciated)
Vortech Supercharger w/ Perrin Tune

Trying to give the car power to play with, but keep the reliability of the stocker. Keep the tunes conservative and the octane 91.

[NickFRS]

Perrin crank pulley still for sale. But my tires are also for sale! $400 bucks or best offer for all (4) hankook v12's. 235/45/17. 5k miles on them. 80% highway and no track days or drift events on them. LMK.

[kuya]

Looking to sell my perrin master cylinder brake brace

www.perrinperformance.com/p/2215

Had it for about a week, I just haven't had the time to install it.
It was an impulse buy, but now I could really use the cash, asking 80 OBO

[ramiram1984]

Originally Posted by kuya

Looking to sell my perrin master cylinder brake brace

www.perrinperformance.com/p/2215

Had it for about a week, I just haven't had the time to install it.
It was an impulse buy, but now I could really use the cash, asking 80 OBO

Install it already

[NickFRS]

*Update on parts + prices*

I'm located in Gladstone but will drive anywhere close to make the swap.

Items for sale are:
...
S> Kartboy Short Shifter. (still in box never even unwrapped)
... $215 local pick up only. ($230 from retailer)

http://ft86speedfactory.com/kartboy-...7e1d19d10aa30c

S> 235/45/17 hankook v12's. 5k miles on them. $400 bucks obo. Moving up to a high performance tires. 80% Mainly highway miles. No track time on them. (current offer is $350)

S> FRS/BRZ Black Perrin Light Weight Crank Pulley $80 bucks. $130 new.
Perrin is going to be uninstalling it. They already said it looks 100% okay! Will have them re-inspect on uninstall. HMU maybe you can have them install it after they uninstall it on my car.

http://www.perrinperformance.com/p/119

[FRSfan111]

Originally Posted by Wonderbar

So I'm gonna make a post here and see if it flies. This is a last call to order one of my rear diffusers for the FRs/BrZ, it fits the stock bumper, will fit any center fed exhaust (ill edit it to fit a side fed exhaust, no issues.)

The part is made from 5052 aluminum, it will be laser cut, machine formed, machine welded. This sale is for a bare aluminum part, I have powder coat worked out for an extra cost. It encloses the entire bottom of the rear bumper, mounts super easy using the lower bolts on the rear sway and factory holes on the bumper, with the exception of two small self taps on the bottom ends of the bumper cover. It's very non-invasive and no one would know it was ever there once removed.

Price is $450, I will personally deliver and install it. Need half for deposit within the next 48 hours. It will be 3-4 weeks for completion. Includes all screws and nuts with silver skunk2 dress up washers for mounting.

Attachment 39963
Attachment 39964Attachment 39965Attachment 39966Attachment 39967

If I already had an exhaust I would have jumps on this. Exactly what I was looking for.

[Wonderbar]

Originally Posted by FRSfan111

If I already had an exhaust I would have jumps on this. Exactly what I was looking for.

It fits on the stock exhaust too!