BIG Brembos, MCS coilovers, SPl Suspension 285/30’s and 18x10 ZE40’s

[ILLSMOQ]

Originally Posted by pgranberg11

bump from the grave, what are your alignment specs back when you first posted these? how much are you lowered, and did you have to roll any of your fenders?

or i guess if you have the same setup now what are the specs? looking into getting ZE40s for the track. Your car and another car have been the only two I've seen that managed to fit 285 in the front without needing to buy over fenders.

I have the alignment specs on my Instagram page @ls3brz

It’s lowered but not slammed.

I also rolled the front fenders and added verus steering limiters.

But the 285 really only fits and works because I narrowed the track front and rear with fully adjustable suspension components from SPL, Racer X and Vorshlag

[ILLSMOQ]

Originally Posted by pgranberg11

bump from the grave, what are your alignment specs back when you first posted these? how much are you lowered, and did you have to roll any of your fenders?

or i guess if you have the same setup now what are the specs? looking into getting ZE40s for the track. Your car and another car have been the only two I've seen that managed to fit 285 in the front without needing to buy over fenders.

I’ll also tell you that while the 18x10 +40 is cool 18x9.5 +40 works a little bit better, and still fits the 285 perfectly

[pgranberg11]

Originally Posted by ILLSMOQ

I’ll also tell you that while the 18x10 +40 is cool 18x9.5 +40 works a little bit better, and still fits the 285 perfectly

thanks I'll give you a follow! and I currently have 9.5 rpf1s, and 285 on a 9.5 is too much bulge for me. I won't be able to take advantage of the full contact patch on 9.5 with a 285. It's good to know that with some suspension modifications that 10" will fit without buying new fenders. thanks for the info!