Cosworth Supercharger Owners Thread - Page 81 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Greacemonkey · 07-30-2018, 02:03 PM

Hi guys, really looking into buying that sweet kit on rallysportdirect but it doesn't specify on their site if it coming with a base map or you get it via internet. Also, I m running a full Tomei exhaust (el header), Matt can you tell me if you tested that header? should I get near the same amount of hp as the nameless?

Thx

weederr33 · 07-30-2018, 02:17 PM

Quote:

Originally Posted by Greacemonkey

Hi guys, really looking into buying that sweet kit on rallysportdirect but it doesn't specify on their site if it coming with a base map or you get it via internet. Also, I m running a full Tomei exhaust (el header), Matt can you tell me if you tested that header? should I get near the same amount of hp as the nameless?

Thx

It should come with instructions on contacting Cosworth about acquiring the tune.
The Tomei headers probably won't perform as good as the Nameless, but you would probably only lose a little hp. I'm sure Matt@Cosworth can tweak your tune!

Greacemonkey · 07-30-2018, 03:12 PM

ok, I would be really surprise too that nothing come with it. ya, I ve never found a good comparison with other headers with longer runners but you might be right. The kit is in my cart right now, one click away to get what I consider the nicest supercharge so far for this engine!

Sylvas808 · 07-30-2018, 06:04 PM

Cosworth all the things! This set took me a while to track down. Eventually had to import from Great Britain.

Greacemonkey · 07-30-2018, 09:08 PM

Those are sweet stoppers! what pads do you use?

ajc209 · 07-31-2018, 02:19 AM

Sent from my SM-G935F using Tapatalk

Seba · 07-31-2018, 05:27 AM

Today, I have installed this P3 gauge , just to control my upcoming SC.

Matt@Cosworth · 07-31-2018, 12:08 PM

Quote:

Originally Posted by Greacemonkey

Hi guys, really looking into buying that sweet kit on rallysportdirect but it doesn't specify on their site if it coming with a base map or you get it via internet. Also, I m running a full Tomei exhaust (el header), Matt can you tell me if you tested that header? should I get near the same amount of hp as the nameless?

Thx

Hello

we did not test that header but I can adjust the tune to cope

just send me a PM when you have the kit and I need to know the following to create the tune

ECUTek ID you're using to flash
year of car
ROM ID if possible
auto or manual
cruise fitted or not
exhaust specification ( pipe size, how many cats, cats in header or not etc

then drive it around for 20 mins all conditions on the preferred fuel and include at least 3 full throttle 'pulls' in 3rd gear from 2000rpm to redline in mode 2 or above
I can then get the tune pretty close with 1 datalog and may need another to get it spot on ( providing there's nothing very different about the car or there's air leaks or other issues)

Greacemonkey · 07-31-2018, 01:46 PM

Quote:

Originally Posted by Matt@Cosworth

Hello

we did not test that header but I can adjust the tune to cope

just send me a PM when you have the kit and I need to know the following to create the tune

ECUTek ID you're using to flash
year of car
ROM ID if possible
auto or manual
cruise fitted or not
exhaust specification ( pipe size, how many cats, cats in header or not etc

then drive it around for 20 mins all conditions on the preferred fuel and include at least 3 full throttle 'pulls' in 3rd gear from 2000rpm to redline in mode 2 or above
I can then get the tune pretty close with 1 datalog and may need another to get it spot on ( providing there's nothing very different about the car or there's air leaks or other issues)

Excellent, I will send those info when I can! I ordered the kit yesterday from Rallysportdirect and should receive it in 10 days ish.
Thx for this good reply!

B T · 07-31-2018, 02:27 PM

Quote:

Originally Posted by Seba

Today, I have installed this P3 gauge , just to control my upcoming SC.

I have the P3 gauge as well, its a great addition and easy to use. Have you looked at wiring in a 0-5V oil pressure sensor?

Seba · 07-31-2018, 03:12 PM

Quote:

Originally Posted by B T

I have the P3 gauge as well, its a great addition and easy to use. Have you looked at wiring in a 0-5V oil pressure sensor?

Not yet.

Sylvas808 · 07-31-2018, 04:44 PM

Quote:

Originally Posted by Greacemonkey

Those are sweet stoppers! what pads do you use?

Running the AP racing pads for now.

Seba · 07-31-2018, 05:05 PM

I am preparing to install my kit on monday. Printed manual can be helpful.

gahooligan · 08-05-2018, 08:17 PM

Quote:

Originally Posted by Sylvas808

Cosworth all the things! This set took me a while to track down. Eventually had to import from Great Britain.

Pretty sure that wasnt cheap!!!

Sent from my SM-N950U using Tapatalk

07-31-2018, 05:27 AM	#1127
Seba Senior Member Join Date: Oct 2015 Drives: BRZ Cosworth SC MY16 Location: Poland Posts: 108 Thanks: 30 Thanked 73 Times in 45 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Today, I have installed this P3 gauge , just to control my upcoming SC. Attached Images

07-31-2018, 05:05 PM	#1133
Seba Senior Member Join Date: Oct 2015 Drives: BRZ Cosworth SC MY16 Location: Poland Posts: 108 Thanks: 30 Thanked 73 Times in 45 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	I am preparing to install my kit on monday. Printed manual can be helpful. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jackson Racing Supercharger Owners Thread	enivid	Forced Induction	6011	05-20-2024 03:54 PM
Kraftwerks Supercharger Owners Thread	projek_01	Forced Induction	4306	04-18-2024 06:23 PM
HKS Supercharger owners thread	wbradley	Forced Induction	1048	10-12-2023 08:03 PM
Phantom FTS Electric Supercharger Owners Thread	TM	Forced Induction	1206	12-15-2019 02:33 PM
Supercharger Kits! Vortech/Cosworth	RallySport Direct	Forced Induction	61	06-29-2015 11:26 AM

07-30-2018, 02:03 PM	#1121
Greacemonkey Member Join Date: Jul 2018 Drives: dark grey Scion frs 2013 Location: MB, Canada Posts: 17 Thanks: 14 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hi guys, really looking into buying that sweet kit on rallysportdirect but it doesn't specify on their site if it coming with a base map or you get it via internet. Also, I m running a full Tomei exhaust (el header), Matt can you tell me if you tested that header? should I get near the same amount of hp as the nameless? Thx

07-30-2018, 03:12 PM	#1123
Greacemonkey Member Join Date: Jul 2018 Drives: dark grey Scion frs 2013 Location: MB, Canada Posts: 17 Thanks: 14 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	ok, I would be really surprise too that nothing come with it. ya, I ve never found a good comparison with other headers with longer runners but you might be right. The kit is in my cart right now, one click away to get what I consider the nicest supercharge so far for this engine!

07-30-2018, 06:04 PM	#1124
Sylvas808 Member Join Date: Oct 2014 Drives: 2015 wrb series.blue brz Location: honolulu Posts: 48 Thanks: 0 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Cosworth all the things! This set took me a while to track down. Eventually had to import from Great Britain.

07-30-2018, 09:08 PM	#1125
Greacemonkey Member Join Date: Jul 2018 Drives: dark grey Scion frs 2013 Location: MB, Canada Posts: 17 Thanks: 14 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Those are sweet stoppers! what pads do you use?

07-31-2018, 02:19 AM	#1126
ajc209 Senior Member Join Date: Dec 2011 Drives: GT86 Cosworth Location: UK Posts: 753 Thanks: 361 Thanked 270 Times in 188 Posts Mentioned: 9 Post(s) Tagged: 1 Thread(s)	Sent from my SM-G935F using Tapatalk

User Name		Remember Me?
Password