4th brake light?

[Sportsguy83]

Originally Posted by Gunman

I used a turn signal flasher

But wouldn't that make it flash all the time? How do you make it flash for only 3 seconds and then go solid?

[Husker BRZ]

Originally Posted by Sportsguy83

But wouldn't that make it flash all the time? How do you make it flash for only 3 seconds and then go solid?

This company makes different modules for different functions depending on what exactly you want, the list is on the page below. Don't know if this is what you were looking for but hope it helps! lol

http://www.kahtec.com/products.htm

[ZOMFGAARON]

Originally Posted by Husker BRZ

This company makes different modules for different functions depending on what exactly you want, the list is on the page below. Don't know if this is what you were looking for but hope it helps! lol



http://www.kahtec.com/products.htm

Interesting I might pick one of these up to try it with my Spyder fourth brake light.


Sent from my iPhone using Tapatalk

[Rosticles]

I wired mine with a triple flash to solid on brake. I then wired the solid lower intensity mode to my fog light switch. I think it looks great with a rear dash light relocation kit.

[ame="https://www.youtube.com/watch?v=RIvQ1s9cE9Y"]Low Profile Carbon Fiber 3rd Brake light - YouTube[/ame]


I used this thread for installation:
http://www.ft86club.com/forums/showt...=fog+led+blink

Parts:
From https://www.superbrightleds.com/

• 744x-SW: 744x Base Wired Sockets 7443-SW: 7443 Socket - $1.95
• 7443-R3W-FL: 7443 LED Bulb - Dual Intensity 1 x 3 Watt High Power LED w/ Brake Flasher 7443-R3W-FL: 7443 Red Brake Flash - $18.95

[ZOMFGAARON]

Originally Posted by Rosticles

I wired mine with a triple flash to solid on brake. I then wired the solid lower intensity mode to my fog light switch. I think it looks great with a rear dash light relocation kit.

I used this thread for installation:
http://www.ft86club.com/forums/showt...=fog+led+blink

Parts:
From https://www.superbrightleds.com/

• 744x-SW: 744x Base Wired Sockets 7443-SW: 7443 Socket - $1.95
• 7443-R3W-FL: 7443 LED Bulb - Dual Intensity 1 x 3 Watt High Power LED w/ Brake Flasher 7443-R3W-FL: 7443 Red Brake Flash - $18.95

Is there a way to modify the speed of the flash?


Sent from my iPhone using Tapatalk

[Gunman]

Originally Posted by Sportsguy83

But wouldn't that make it flash all the time? How do you make it flash for only 3 seconds and then go solid?

Correct, it flashes the entire time the brakes are applied.

[Rosticles]

Originally Posted by ZOMFGAARON

Is there a way to modify the speed of the flash?

Not with the bulbs that have the flasher unit built in. If you were to buy a separate module for this, like some others in this post have mentioned, then it should be possible.

Or you could just make one yourself, it only involves like 4 components.