Exhaust tip for OEM exhaust - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Gunman · 12-18-2014, 07:29 PM

Anyone found a polished stainless, rolled edge, double wall tip, that fills the exhaust cutout, and fits the 2 1/8" OEM exhaust?

Everything seems to be too long, ie designed for a diesel, or has some brand name scribbled on it.

kodyo · 12-18-2014, 08:18 PM

When I had the OEM exhaust, I ended up making some of my own. Here's my post on it:
http://www.ft86club.com/forums/showp...1&postcount=11

BRZnut · 12-18-2014, 08:30 PM

Quote:

Originally Posted by Gunman

Anyone found a polished stainless, rolled edge, double wall tip, that fills the exhaust cutout, and fits the 2 1/8" OEM exhaust?

Everything seems to be too long, ie designed for a diesel, or has some brand name scribbled on it.

I looked and looked for 2 years at several manufacture's sites and could not find one. Was surprised no one seemed to make anything that would fit. Finally just got the Perrin tips from an unknown site at a discount.

Gunman · 12-18-2014, 09:07 PM

Quote:

Originally Posted by BRZnut

I looked and looked for 2 years at several manufacture's sites and could not find one. Was surprised no one seemed to make anything that would fit. Finally just got the Perrin tips from an unknown site at a discount.

I hear ya. @KOydo has a good idea, but I still haven't found a rolled tip that meets all the parameters.

kodyo · 12-18-2014, 09:10 PM

If you can't find the tips you want and plan to stick with the OEM exhaust, you should go to an exhaust shop and have them weld on some for you. Probably wouldn't cost much.

Gunman · 12-18-2014, 09:24 PM

I'm thinking that might be what I have to do.

bee-jay · 12-18-2014, 10:04 PM

the larger tips on the 2015 BRZ's will fit.

Gunman · 12-18-2014, 10:16 PM

Quote:

Originally Posted by bee-jay

the larger tips on the 2015 BRZ's will fit.

Yeah, I like the longer JDM version, but I really like the look of a traditional rolled edge.

bee-jay · 12-19-2014, 09:22 AM

Quote:

Originally Posted by Gunman

Yeah, I like the longer JDM version, but I really like the look of a traditional rolled edge.

yea, too bad Invidia doesn't do an add on tip. I'm leaning towards the JDM ones as well.
I have the TRD exhaust on now and I'm not sure I'm leaving it on. I do like the look of the rolled D tip though.

jeffchap · 12-19-2014, 09:36 AM

I got these tips at Wal Mart for about $25/pair. Rolled, double walled and baffled.

Gunman · 12-19-2014, 11:51 AM

I may have to swing by Wally World and see what they have.

Dadhawk · 12-19-2014, 12:56 PM

Quote:

Originally Posted by Gunman

I may have to swing by Wally World and see what they have.

If you have one near you, I'd try Pep Boys first. Quite a few of us bought tips from them when the cars came out in 2012. They have both chrome and black. I went with these, but they had round ones as well (stock tip on the right)

355rockit · 12-21-2014, 05:55 PM

Quote:

Originally Posted by jeffchap

I got these tips at Wal Mart for about $25/pair. Rolled, double walled and baffled.

Those look nice. By any chance do you have the part # or the Walmart SKU you could provide?

jeffchap · 12-24-2014, 12:09 PM

I'm pretty sure it's this one. They were only $12.95 in the store though.

http://mobile.walmart.com/ip/Pilot-A...57?type=search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust System/Exhaust Manifold Removal and Replacement	GrimmSpeed	DIY (Do-It-Yourself) Guides	52	11-11-2015 09:30 PM
Another project teaser. Exhaust hole covers for single exit exhaust!	Wonderbar	Cosmetic Modification (Interior/Exterior/Lighting)	57	05-30-2014 01:46 AM
Revive Your Exhaust Tone with Our Debut FT86Club Exhaust Clearance Sale!	FRSport.com	Engine, Exhaust, Bolt-Ons	0	09-06-2013 02:08 PM
Perrin Catback Exhaust vs Nameless Performance Exhaust.	vignesh	Engine, Exhaust, Transmission	201	06-05-2013 09:47 PM
Can someone explain the diffrence between catback exhaust and axleback exhaust?	speedy racer	Engine, Exhaust, Transmission	12	09-23-2012 12:24 PM

12-18-2014, 08:18 PM	#2
kodyo Senior Member Join Date: Jan 2013 Drives: Scion FR-S Location: Los Angeles Posts: 686 Thanks: 597 Thanked 256 Times in 173 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	When I had the OEM exhaust, I ended up making some of my own. Here's my post on it: http://www.ft86club.com/forums/showp...1&postcount=11

12-18-2014, 09:10 PM	#5
kodyo Senior Member Join Date: Jan 2013 Drives: Scion FR-S Location: Los Angeles Posts: 686 Thanks: 597 Thanked 256 Times in 173 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	If you can't find the tips you want and plan to stick with the OEM exhaust, you should go to an exhaust shop and have them weld on some for you. Probably wouldn't cost much.

12-18-2014, 10:04 PM	#7
bee-jay Senior Member Join Date: May 2014 Drives: 2014 BRZ LTD WR Blue Pearl Location: Eastern, PA Posts: 128 Thanks: 4 Thanked 71 Times in 41 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	the larger tips on the 2015 BRZ's will fit.

User Name		Remember Me?
Password