Wheel specs for Rocket Bunny Fenders

[Scalzo]

Originally Posted by AznKirby

Look at those specs. Nothing will be "cheap".
If you want to spend less money, used wheels would be your best bet.

Edit: I've seen your build. Why would you want to put cheap wheels on that nice car?

I was looking at the forgestar f14s or f14f I have a budget of Max 2k$ for wheels

Sent from my Nexus 5 using Tapatalk

[Maverick22]

Originally Posted by Scalzo

So if I want to run 17s or 18s I should go 18x9.5 +0 or -10 & 18x10.5 -30 to fit? I don't want to be slammed but no wheel gap.. What are some cheap wheels that will fit. BBS style

you might need -25 in rear.

[Maverick22]

Originally Posted by CodyFRS

Thinkin about going with a set of 18x11 +20 square. Would these fit the rocketbunny fenders? or would I have turning radius problems up front?

you are going to need a 15-20mm spacer up front and a a 15-20mm spacer rear. you can't run anything wider than a 9.5 in front, however you can run a 11 inchwide rear. you will need to be careful with your tire size.

[Maverick22]

I updated post 14 with more accurate info.

[Yamajee]

Originally Posted by Maverick22

you are going to need a 15-20mm spacer up front and a a 15-20mm spacer rear. you can't run anything wider than a 9.5 in front, however you can run a 11 inchwide rear. you will need to be careful with your tire size.

18x11" in the rear and 18x9.5" fronts, you're correct, anything more and we start rubbing everywhere.

[kal-el]

Anybody can help me which setup best for RB v.2 planning on getyong weds maverick 605S couldnt figure out the inset [URL] http://maverick-weds.jp/605s.html#[URL]

Sent from my GT-I9500 using Tapatalk

[KIMOJIxSTYLE]

im getting me some weds orden too man and I might just do 18x9.5 -20 up front n 18x10.5-40, any one think this might be too much offset?

[kal-el]

Originally Posted by KIMOJIxSTYLE

im getting me some weds orden too man and I might just do 18x9.5 -20 up front n 18x10.5-40, any one think this might be too much offset?

Hi bro really? I was told that they dont have aggressive offset like that? Please let me know if they have... cuz i was told different

Sent from my GT-I9500 using Tapatalk

[KIMOJIxSTYLE]

well if u go to evasive motorsport,, they do have some close to it,,, and if u go to weds.com open thier wheel selection size chart its all custom to ur liking,

Sent from my SGH-M919 using Tapatalk

[jumbaco]

Originally Posted by Speed Element

15mm spacer up front. no issue with full lock

-Ryan

the 18x9.5 -15 is the effective offset after the spacer or is that before the spacer?

[Speed Element]

Originally Posted by jumbaco

the 18x9.5 -15 is the effective offset after the spacer or is that before the spacer?

before to clear our bbk.

-Ryan

[Kami Speed]

Originally Posted by kal-el

Hi bro really? I was told that they dont have aggressive offset like that? Please let me know if they have... cuz i was told different

Sent from my GT-I9500 using Tapatalk

Closest to that setup will be 18x9.5 -24 (4inch lip) | 18x10.5 -36 (5inch lip)

[AznKirby]

I'm planning on running
Front: 18x9.5 +26 (25mm spacers)
Rear: 18x10.5 +1 (25mm spacers)

I'm afraid the rear will be sunken in - not that I'm looking for massive amounts of camber, either. I know xdjdubx was running two spacers in the rear for a total of 50 mm with his 10.5, but that seems a bit unsafe.

Thoughts?

[kal-el]

Originally Posted by Kami Speed

Closest to that setup will be 18x9.5 -24 (4inch lip) | 18x10.5 -36 (5inch lip)

I dont get their website.. the below is asnapshot of the wheels setups they have.. which one will have that 4 and 5 inch lips? i used google translate and it says insets

Sent from my GT-I9500 using Tapatalk