Full Blown Turbo Kit Owners Topic - Page 117 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

King Tut · 05-09-2014, 11:39 PM

I love a little off topic discussion as much as the next guy, but lets not turn the Full Blown Owners Thread into the Innovate thread where all that is discussed is Delicious Tuning.

sw20kosh · 05-10-2014, 02:03 AM

Quote:

Originally Posted by King Tut

I love a little off topic discussion as much as the next guy, but lets not turn the Full Blown Owners Thread into the Innovate thread where all that is discussed is Delicious Tuning.

Lol

69Marshall69 · 05-10-2014, 05:31 PM

Hey guys, I bought a used kit from a guy and am missing a couple small parts. I have replaced most of them but needed a professional opinion on the port injectors I have bought. I got the ID 1000cc port injectors and was hoping someone can tell me what they used for spacers on the fuel rail (due to the longer injector) and also whether or not the bolts for the fuel rail have to be longer. I have looked around and found little information for this part of the install. thanks guys!

Dipstik-sportech · 05-10-2014, 07:31 PM

I believe they're 1/2" spacers. Call up @FullBlown LJ will probably sell u the correct spacers and bolts as well as any other parts you're missing

The Frozen North

King Tut · 05-10-2014, 09:27 PM

Quote:

Originally Posted by 69Marshall69

Hey guys, I bought a used kit from a guy and am missing a couple small parts. I have replaced most of them but needed a professional opinion on the port injectors I have bought. I got the ID 1000cc port injectors and was hoping someone can tell me what they used for spacers on the fuel rail (due to the longer injector) and also whether or not the bolts for the fuel rail have to be longer. I have looked around and found little information for this part of the install. thanks guys!

Mine was missing the spacers and bolts. I had to call up LJ @FullBlown and he told me you can get plastic 1/2" spacers from the hardware section in Lowes and bring the OEM bolt with to get the correct size new bolt. They worked great.

69Marshall69 · 05-10-2014, 09:33 PM

Thanks king tut and dipstik-sportech. Just to make sure, the extension of the new bolt compared to the OEM bolt is just the length of the spacer correct?

Dipstik-sportech · 05-10-2014, 09:41 PM

Yup. And the bolt is an m8x1.25 if I remember correctly

The Frozen North

69Marshall69 · 05-10-2014, 09:46 PM

Ok thanks, I was told before that it was 8mm, which is .3 inches. But I suppose it doesn't matter as long at both the spacer and bolt are related to the same length difference. I go by millimeters just because of the Canadian metric system. but I will look for the 1/2 inch spacers and bolts

Dan

Boba_kz · 05-14-2014, 07:53 AM

What is 1/4 time for stage 1 AT?

Dipstik-sportech · 05-14-2014, 09:25 AM

Quote:

Originally Posted by Boba_kz

What is 1/4 time for stage 1 AT?

Depends on too many factors to say a standard time.

The Frozen North

FAER · 05-14-2014, 10:46 AM

Quote:

Originally Posted by Boba_kz

What is 1/4 time for stage 1 AT?

10 seconds if you have two bottle of NOZ.... Big ones.... and you get them by tonight

Sportsguy83 · 05-14-2014, 10:49 AM

Quote:

Originally Posted by FAER

10 seconds if you have two bottle of NOZ.... Big ones.... and you get them by tonight

That doesn't work unless you buy from Harry's.

FAER · 05-14-2014, 10:51 AM

Shit don't call out Harry like that, now he is gonna get banned for not sponsoring the forums..

King Tut · 05-14-2014, 05:07 PM

Quote:

Originally Posted by Boba_kz

What is 1/4 time for stage 1 AT?

I had a base Stage 1 and did a 13.1 so that would be my best guess.

05-09-2014, 11:39 PM	#1625
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s) Tagged: 10 Thread(s)	I love a little off topic discussion as much as the next guy, but lets not turn the Full Blown Owners Thread into the Innovate thread where all that is discussed is Delicious Tuning. __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

05-10-2014, 07:31 PM	#1628
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s) Tagged: 0 Thread(s)	I believe they're 1/2" spacers. Call up @FullBlown LJ will probably sell u the correct spacers and bolts as well as any other parts you're missing The Frozen North __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

05-10-2014, 09:41 PM	#1631
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s) Tagged: 0 Thread(s)	Yup. And the bolt is an m8x1.25 if I remember correctly The Frozen North __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AVO Turbo Kit Owners Topic	Sportsguy83	Forced Induction	1935	02-20-2023 10:46 AM
Full Blown FRS/BRZ Stage 1 Turbo Kit	FullBlown	Forced Induction	456	09-27-2021 03:10 AM
FA20Club Turbo Kit Owners Topic	pixel67	Forced Induction	1531	09-09-2014 12:36 PM
Full Blown Turbo Kit!	Unleashed	Engine, Exhaust, Bolt-Ons	70	10-09-2013 09:46 AM
WTB: Full Blown turbo kit (used)	whitefrs	Engine, Exhaust, Bolt-Ons	12	03-29-2013 09:15 PM

05-14-2014, 07:53 AM	#1633
Boba_kz Member Join Date: Sep 2013 Drives: BRZ Location: Kazakhstan Posts: 60 Thanks: 51 Thanked 10 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	What is 1/4 time for stage 1 AT?

05-14-2014, 10:51 AM	#1637
FAER Banned Join Date: Mar 2013 Drives: Silver BRZ Location: Texas Posts: 361 Thanks: 22 Thanked 118 Times in 86 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	Shit don't call out Harry like that, now he is gonna get banned for not sponsoring the forums..

User Name		Remember Me?
Password