|
Software Tuning Discuss all software tuning topics. |
|
Thread Tools | Search this Thread |
03-06-2014, 05:41 PM | #1 |
Join Date: Mar 2013
Drives: 2013 Firestorm FRS
Location: Lake Elsinore, CA
Posts: 2,707
Thanks: 1,231
Thanked 2,144 Times in 1,003 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
OFT-Help with Romraider/FFS and Launch Control-issues
I need help with flat foot shifting and launch control. I currently have both setup right now, but there are two issues that keep coming up.
The first, is launch control. I currently have it set at 4k rpm, and set to disable at 10mph. If I am stopped in the car, with the car in neutral (not pushing on the clutch) and I step on the gas (wot), it goes straight to 4k and sits there...which is what it should do, however, it does this whether or not I am stepping on the clutch-I though LC should only be enabled when full throttle AND stepping on the clutch. The only potential issue here (I think) is that I can't be cool and rev to 7k while in neutral. Pretty minor issue. However, when I'm cruising on the highway (going, say 60pmh) and I step on the clutch and floor it, the rpm's go to 5k(which it should, since the way launch control is configured in the computer by redline (minus) XXXX)-but, I'm going over 10mph, so why did it engage?. Again, while on the highway If I dont step on the clutch, and I floor it, the car will rev to 7k. SOOO...Isn't this supposed to be the way the car/rpm's respond when I'm stopped-and not on the highway? When I'm stopped or below 10mph, it should allow me to rev to 7k, unless I am stepping on the clutch, and then it should go to whatever my preset launch rpm is, and if I'm going over 10mph, it shouldn't engage at all. The second issue is bigger for me (but I think it has to do with launch control). I have flat foot shift/wot shift/no lift shift enabled, and there are two things that affect me. The first, is when going wot and shifting. If I'm approaching 7k rpms, and I upshift to the next gear, there is a pause in power (which it should), but then a .5 second delay or so before power comes back on. Great, thats what it should do. HOWEVER, during this time the car drops to 5k...which brings me back to my launch control issue. Because launch control doesn't seem to be disabled over 10mph, when I flat foot shift, the car thinks it should be in "launch mode"(because it see's full throttle and depressed clutch) and brings the rpms to 5k (and yes, I understand my rpms will drop while shifting lol) but it makes the engine go from 7k rpms, to 5k rpms to whatever rpm based on my gear and speed. This makes for a pretty jerky wot shift. I also run into this issue when downshifting before a turn. For example, I'll be in 3rd gear full throttle, and as I approach the corner, brake, clutch, blip the gas and downshift to 2nd, release the clutch and go back to wot. Once I got wot in 2nd, there is a .5 or so second delay before power is delivered-leading me to think its an issue with flat foot shift enabled, or the launch control issue I touched on before. This is an issue because the power gets applied at a different time than I expect, and will occasionally upset the balance of the car. Sorry for a long post/semi confusing questions, but hopefully someone can help me out on this topic. I realize this might be confusing, but its a weird glitch/issue and I dont know how else to explain it. |
03-06-2014, 06:11 PM | #2 |
My Other Ride's a Jeep
Join Date: Aug 2013
Drives: 2013 BRZ Limited
Location: United States
Posts: 893
Thanks: 431
Thanked 253 Times in 198 Posts
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
|
To be honest, that was a big wall of text to read so I will just outline how these functions are supposed to work. I tried to read it 3 times and couldn't focus long enough.
LC: When the car is stationary or below the LC speed (which you say is set to 10mph) the car will impose a secondary rev limit which is equal to the original rev limit minus the LC Delta. When you pass the LC Speed, the car will rev to its normal rev limit. This works independent of clutch position or gear state. Our 2011 Grand Cherokee actually works like this and it is an auto. FFS: This is a 3rd Rev limit imposed by the clutch position. When the clutch is depressed, the new rev limit becomes the one set for FFS. This works independent of vehicle speed. If I am reading your first paragraph correctly, what you are experiencing is happening because you have LC Delta = 3600 and FFS Delta = 2600. Try rolling drop it in gear while cruising above 10mph and put it in nuetral with the clutch out (foot off the pedal) and it should rev out to the redline. |
03-06-2014, 06:13 PM | #3 |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,988 Times in 2,982 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
This is my understanding of launch control & FFS
It pretty basic implementation of launch control and FFS I have not used FFS but have LC enabled only ie if your car is doing less than the disable speed (10) then it will only rev to the RPM you set in LC parameters ie redline- LC setting = rpm. I don't believe their is any interaction with clutch switch for launch control its just speed and RPM. I think the reason your car revs to 5000 rpm on highway with clutch in is the car is using the FFS parameters not the LC parameters as you are over the disable speed for LC. (FFS uses clutch switch wheras LC does,t) So it looks like you have your FFS delta set to 2600 rpm so in FFS mode with clutch in it hold rpm at 5000 (redline-FFS delta). Again it probably a simple implementation of FFS designed for upshift only. Personally I would just disable FFS. Basicly I agree with @Luckrider above |
The Following User Says Thank You to steve99 For This Useful Post: | Shiv@Openflash (03-06-2014) |
03-06-2014, 06:29 PM | #4 |
Senior Member
Join Date: Sep 2013
Drives: 2013 FRS
Location: SF, CA
Posts: 2,629
Thanks: 1,055
Thanked 5,469 Times in 1,494 Posts
Mentioned: 605 Post(s)
Tagged: 9 Thread(s)
|
I'll be be first to admit my disdain for flatfoot shift. Maybe it has merits in drag racing with a turbo kit since it will prevent boost from discharging between shifts. But for the other 99.99% of applications, it does sacrifice drivability due to false triggering from having your left foot sometimes rest on or brush against the clutch pedal.
|
03-06-2014, 08:37 PM | #5 | |
Proud dad of 2 boys :)
Join Date: Jul 2013
Drives: Firestorm 6-MT
Location: F-TOWN, CT
Posts: 312
Thanks: 203
Thanked 313 Times in 138 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
As Steve99 stated, LC is triggered by Vehicle Speed; FFS is triggered by the Clutch Sensor. Launch Control I've had no problems with, it works as it should, you don't have to be at WOT for it to engage. Mine is set to 3,400rpm. Past 10mph, it does not engage, as expected. Flat-Foot Shifting, on the other hand... needs some finessing: you have to find the right RPM for it to engage at depending on how you drive. I've set it to 5,000rpm. Ideally, if you are at WOT and shift at max RPM, (mine being 7,600rpm), you want the RPM's to hover right around where the next gear will engage. Your description of loss in power is EXACTLY how I experience it while shifting at WOT. There is a "digitized bog". HOWEVER, when going WOT and not lifting the off the clutch (thus a flat foot shift) while shifting at the FFS rpm (for me) 5,000rpm.... the shifts are INSTANt with absolutely no bog in power. I feel like a human DCT. No one would believe that there was a manual transmission in my car from the sound alone. This leads me to believe that the FFS delta should be a bit lower, meaning be set to a higher RPM. I have a ROM with edited to a 6,000rpm FFS setting, but I have yet to test it out. |
|
03-06-2014, 08:43 PM | #6 | |
Proud dad of 2 boys :)
Join Date: Jul 2013
Drives: Firestorm 6-MT
Location: F-TOWN, CT
Posts: 312
Thanks: 203
Thanked 313 Times in 138 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I also have a suspicion that shifting "too fast" will cause this. When I shift "casually", there is no powerloss, but a "blip-blip" or "blip". When doing a FFS but at the delta, there is no blip, just sounds like an auto engaging the next gear. |
|
03-28-2014, 06:37 AM | #7 |
Senior Member
Join Date: Jul 2012
Drives: frs
Location: Cali
Posts: 379
Thanks: 355
Thanked 54 Times in 43 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
|
04-01-2014, 01:18 AM | #8 |
Join Date: Mar 2013
Drives: 2013 Firestorm FRS
Location: Lake Elsinore, CA
Posts: 2,707
Thanks: 1,231
Thanked 2,144 Times in 1,003 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
|
04-01-2014, 03:32 AM | #9 |
Senior Member
Join Date: Jul 2012
Drives: frs
Location: Cali
Posts: 379
Thanks: 355
Thanked 54 Times in 43 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
|
04-17-2014, 11:07 PM | #10 |
Senior Member
Join Date: Oct 2012
Drives: 2013 Subaru BR-Z Limited
Location: Fort Lauderdale, Florida
Posts: 883
Thanks: 407
Thanked 562 Times in 294 Posts
Mentioned: 42 Post(s)
Tagged: 4 Thread(s)
|
Sounds like an OFT glitch..these functions work great with ecutek. FFS are super smooth and fast and I've never had either function trigger without intending it to. I don't have auto blip downshift enabled as I've heard horror stories there (plus I prefer to double clutch downshifts) but those are the only issues I've heard of. Not trying to make this ecutek vs oft at all, just sharing my experience with the features as I like them both and they work well.
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFlash Tablet: RomRaider parameters for Launch Control and Flat-foot Shift | Shiv@Openflash | Software Tuning | 118 | 06-04-2017 04:26 AM |
EcuTek RaceROM Launch Control | just86 | Software Tuning | 47 | 03-14-2014 02:55 PM |
Unichip Launch control | SCharged | Software Tuning | 11 | 01-22-2014 01:13 PM |
ECUTEK Launch Control for AT transmission | Kinaa | Software Tuning | 10 | 12-22-2013 01:45 AM |
Launch Control on Auto? | devinclfalcons | Engine, Exhaust, Transmission | 28 | 03-01-2012 07:14 PM |