Innovate (Sprintex) Supercharger Owners Topic

[MattF]

Originally Posted by invisage

Thanks is your header catted or uncatted?

Its catted.

[swift996]

I received a check engine light (CEL) this morning:

Code P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input

No changes to the car, this morning was rather cool but not sure what would be causing this? Perhaps the MAP sensor?

[evo4g63]

Originally Posted by ft_sjo

A crackling noise from the front?

It's more of a pop type sound

[Opposed]

Originally Posted by evo4g63

It's more of a pop type sound

Uh oh, check your DI seals stat...

[djdnz]

Originally Posted by Opposed

Uh oh, check your DI seals stat...

x2

[tech4pdx]

Originally Posted by swift996

I received a check engine light (CEL) this morning:

Code P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input

No changes to the car, this morning was rather cool but not sure what would be causing this? Perhaps the MAP sensor?

That is a MAP sensor voltage reading issue, I would guess. Who did your tune? It's happening because of the boost. Talk to your tuner!

[swift996]

Originally Posted by tech4pdx

That is a MAP sensor voltage reading issue, I would guess. Who did your tune? It's happening because of the boost. Talk to your tuner!

Yeah I sent a PM to my tuner (Moto-Mike) he thinks it might just be the cold weather. He's reworking the tune anyways and is suppose to have it back to me later this week.

[invisage]

Originally Posted by swift996

I received a check engine light (CEL) this morning:

Code P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input

No changes to the car, this morning was rather cool but not sure what would be causing this? Perhaps the MAP sensor?

Guy here in Perth started getting the same thing. Had to change out the MAP sensor

[tech4pdx]

Originally Posted by evo4g63

It's more of a pop type sound

Start troubleshooting before you start worrying about the DI seals. I get all kinds of snap, crackle and pop noises from under my hood (even before the blower was bolted on). I've accepted many of the noises as the nature of the beast. "Because racecar" after all (;

Who did your tune?

[evo4g63]

Originally Posted by Opposed

Uh oh, check your DI seals stat...

Fml, this is what I was afraid of.

Originally Posted by tech4pdx

Start troubleshooting before you start worrying about the DI seals. I get all kinds of snap, crackle and pop noises from under my hood (even before the blower was bolted on). I've accepted many of the noises as the nature of the beast. "Because racecar" after all (;

Who did your tune?

I am unsure what the noise is to be honest. It only happens when throttle is blipped at higher rpm, shifting at wot or clutch pushed in and throttle blipped. No cel's, no noise at idle, no noise when blipping throttle at a stop unless clutch is engaged. I have looked for any signs of possible rubbing of the belt but nothing. Problem is I never noticed this till the blower was out on. Probably because I never payed attention to it.

[sw20kosh]

Originally Posted by invisage

Guy here in Perth started getting the same thing. Had to change out the MAP sensor

This is interesting and worth discussing. Why are the MAP sensors failing?

[swift996]

I cleared my CEL at lunch and it hasn't come back on, perhaps it was the cold weather...

[tech4pdx]

@evo4g63 Are you on the stock clutch?

[RedLeader]

Originally Posted by evo4g63

What does it sound like? This worries me now 😣

If you want to make the drive to tucson on friday night for our local meet, I'll be more than happy to demonstrate said noise for you. And maybe I'll get abatter idea of whatever popping noise you're experiencing sounds like.