Rydeen Duo on BRZ Limited - Page 10 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

tripjammer · 02-25-2013, 03:38 PM

So what all do I need to make this work? I see that the Rydeen duo is like only $100. Which wiring harness do I need to just plug and play into the stock BRZ head unit?

Jive Turkey · 02-25-2013, 03:41 PM

contact SVDX and he will send you the harness. you literally plug that into the back of your head unit and tap the red wire or use the harness he provides and thats it. then all you have to do is run all the wiring back to the trunk, drill your trunk garnish and tuck all the wiring and thats its. really no more than an hour if you take your time and kill a 6-pack

Skippman · 02-25-2013, 04:24 PM

Does using the factory mounting location throw off the image since it's off center?

chadstyle · 02-25-2013, 04:38 PM

Quote:

Originally Posted by Skippman

Does using the factory mounting location throw off the image since it's off center?

No because the lines that are built into the factory deck are skewed to match. The factory location works great and if you start looking at other cars with factory back up cams you will notice they are almost always off center.

Jive Turkey · 02-27-2013, 03:40 PM

to be honest i dont even pay attention to the lines, you can visually see the distance of the bumper to w/e is behind you.

Foobar · 02-27-2013, 04:40 PM

Not only that, but you can configure the line placement anyway. I have a license plate camera that's dead center - I adjusted the lines to reflect the same.

Norkoastal · 02-27-2013, 04:47 PM

Quote:

Originally Posted by chadstyle

No because the lines that are built into the factory deck are skewed to match. The factory location works great and if you start looking at other cars with factory back up cams you will notice they are almost always off center.

For symmetry freaks like me who hate offset stuff, you can adjust the lines on the camera via the HU. I installed m Rydeen smack dab center and its way more stealth than the offset install.

xjohnx · 02-27-2013, 04:48 PM

Quote:

Originally Posted by Norkoastal

I installed m Rydeen smack dab center and its way more stealth than the offset install.

BRZ Limited owners don't have that option, unfortunately.

chadstyle · 02-27-2013, 07:12 PM

Quote:

Originally Posted by xjohnx

BRZ Limited owners don't have that option, unfortunately.

This^^^

Norkoastal · 02-27-2013, 07:30 PM

Quote:

Originally Posted by xjohnx

BRZ Limited owners don't have that option, unfortunately.

One advantage of the Premium

Sorry Limiteds no center mount for you!

lbroskee · 02-28-2013, 11:40 PM

any1 got a link where to pickup this camera from?

kludger · 03-01-2013, 12:43 AM

Quote:

Originally Posted by lbroskee

any1 got a link where to pickup this camera from?

Yep I posted where I picked mine up from on a prev post in this thread see:
http://www.ft86club.com/forums/showp...&postcount=103

lbroskee · 03-01-2013, 01:09 AM

Quote:

Originally Posted by kludger

Yep I posted where I picked mine up from on a prev post in this thread see:
http://www.ft86club.com/forums/showp...&postcount=103

thanx, i missed that. any update on if it works perfectly too?

kludger · 03-01-2013, 11:21 AM

Quote:

Originally Posted by lbroskee

thanx, i missed that. any update on if it works perfectly too?

I've been waiting on svxdc to return for the power wire update on the HU harness so haven't done the install yet (don't want to tap the factory harness), but I think a couple of others may have ordered from there as well and I haven't heard anything negative...

I'm getting pretty antsy though so I might end up installing anyhow soon.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DGM BRZ limited on the way?	Coheed	Member's Car Journals	16	04-11-2013 02:09 AM
My LR BRZ Limited	epson1	BRZ Photos, Videos, Wallpapers, Gallery Forum	11	09-08-2012 02:18 PM
BRZ Limited Available	JohnATL	Southeast	3	08-12-2012 11:32 AM
Want to buy a BRZ Limited AT	kgc	Northwest	1	06-16-2012 11:45 PM
DGM BRZ Limited (man) available	Mitchs_86	BRZ First-Gen (2012+) -- General Topics	6	06-14-2012 12:50 PM

02-25-2013, 03:41 PM	#128
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	contact SVDX and he will send you the harness. you literally plug that into the back of your head unit and tap the red wire or use the harness he provides and thats it. then all you have to do is run all the wiring back to the trunk, drill your trunk garnish and tuck all the wiring and thats its. really no more than an hour if you take your time and kill a 6-pack

02-25-2013, 04:24 PM	#129
Skippman Senior Member Join Date: Jan 2013 Drives: GBS BRZ Limited Location: St. Louis MO Posts: 290 Thanks: 47 Thanked 48 Times in 42 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Does using the factory mounting location throw off the image since it's off center?

02-27-2013, 03:40 PM	#131
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	to be honest i dont even pay attention to the lines, you can visually see the distance of the bumper to w/e is behind you.

User Name		Remember Me?
Password